VIAVI Secure µPNT STL-1000 LEO receiver module, M.2 2242 B-Key form factor
VIAVI / Positioning, Navigation and Timing / Embedded Receiver Modules
STL-1000

Secure µPNT STL-1000 LEO Receiver Module, M.2 2242 B-Key Embedded LEO/GNSS PNT Receiver

M.2 2242 B-Key LEO/GNSS embedded PNT receiver module with MEMS TCXO GPSDO holdover, 10 MHz and 1 PPS outputs and ≤1.0 W power.

GPS Locked
<15 ns rms
STL Locked
<65 ns rms
Datasheet

Overview

The VIAVI Secure µPNT STL-1000 is a software-defined STL LEO/GNSS embedded Positioning, Navigation and Timing (PNT) receiver module built to the M.2 2242 B-Key form factor. It supports the Iridium-based VIAVI SecureTime altGNSS LEO services, providing PNT when GNSS is unavailable. The module is derived from the field-tested STL-2600 and STL-1400 receivers, with a form factor modified to follow the M.2 B-Key socket standard.

The module measures 22 mm x 42 mm x 2.3 mm, weighs 3.6 g and typically consumes 1.0 W, which suits applications that need a very small, low-power, resilient embedded PNT receiver.

Timing and holdover

The STL-1000 combines a MEMS TCXO with VIAVI GPSDO disciplining technology, so it can operate as a compact GPSDO with holdover capability. It is the only STL receiver in the family with this capability. An external 1 PPS input can also be used for disciplining.

Outputs and control

The module provides 10 MHz and 1 PPS outputs, NMEA-based position, navigation and timing data, raw satellite observables and GNSS parameters. It is controlled through SCPI and NMEA serial interfaces, its firmware can be upgraded in the field, and it works with the GPSCon and JLTerm control software.

Key Features

  • M.2 B-Key form factor
  • MEMS TCXO 10 ppb providing GPSDO timing and holdover capability
  • STL receiver supporting Iridium PNT-based SecureTime service options
  • 1 PPS output accuracy <65 ns rms to UTC (STL)
  • CMOS 3.3 V 10 MHz and 1 PPS output signals
  • External 1 PPS input signal support for disciplining
  • SCPI and NMEA serial interfaces
  • Field-upgradeable firmware
  • Low power operation (typically ≤1.0 W)
  • Compatible with GPSCon and JLTerm control software

Specifications

1 PPS Stability
GPS Locked <15 ns rms
GPS locked (After 48 Hr Lock)
STL Locked <65 ns rms
STL lock capability requires active subscription to Iridium based SecureTime altGNSS LEO services
Receiver
NMEA Messages GGA, RMC, ZDA, GSV, PASHR, GSA
GNSS Receiver GPS/GLONASS/Galileo/BeiDou/QZSS/SBAS
STL Receiver 3.3 V antenna-power built-in, custom-designed receiver
Sensitivity
GPS Acquisition –148 dBm
GPS Tracking –167 dBm
STL Tracking -120 dBm
25 dB antenna LNA gain assumed
MEMS Oscillator
Frequency Output 10 MHz CMOS 3.3 V
Frequency Stability over Temperature in Holdover mode ±1.0E-08
-40 to +80°C
10 MHz Accuracy <±1.5E-10
after 20 minutes with STL or GNSS; STL lock requires active SecureTime altGNSS LEO subscription
Phase Noise <-75 dBc/Hz
@1 Hz
MEMS TCXO 10 ppb
I/O Signals and Connectors
RF Antenna Miniature U.Fl Coax, Combined Input for STL and GNSS
10 MHz Output Auxiliary Hirose Connector, CMOS 3.3 V
10 MHz Input Auxiliary Hirose Connector, External 10 MHz Reference Input Signal
1 PPS Output Auxiliary Hirose Connector, UTC (GPS) and UTC (STL) synchronized, CMOS 3.3 V, 200 ms pulse-width
1 PPS Input Auxiliary Hirose Connector, External 1 PPS Reference Input Signal
Serial Control Auxiliary Hirose Connector, 9,600 to 921,600 bps, TTL NMEA out, SCPI Control/Monitoring, External CSAC/Rb Oscillator Control, Status Signals, In Situ Firmware Updates
M.2 USB B-Key 2242 Connector
Power
Power Consumption 1.0 W
Typical
Supply Voltage (Vdd) +3.3 V: +0.2 V, -0.1 V
Environmental
Operating Temperature -40°C to 85°C
Storage Temperature -45°C to 95°C
Regulatory and Compliance
Regulatory Standards CE/UKCA, RoHS/WEEE, REACH, Canadian Standards Association (CSA), Radio Equipment Directive (RED)
Physical
Width 0.87 inch/22 mm
Depth 1.65 inch/42 mm
Height 0.09 inch/2.3 mm
Weight 0.128 oz/3.6 grams
Web page states 3.6 g (0.2 oz); datasheet value used

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

  • Defense
  • 5G communications
  • Transportation
  • Data centers
  • Energy
  • Financial services
  • Critical infrastructure
  • PNT in GNSS-denied environments

Options & Accessories

Option Description
22187422-000 Secure µPNT STL-1000 LEO Receiver
SecureTime altGNSS LEO-S SecureTime altGNSS LEO-S service option — Iridium-based SecureTime service; an active subscription is required for STL lock
SecureTime altGNSS LEO LOCUS SecureTime altGNSS LEO LOCUS service option — Iridium-based SecureTime service; an active subscription is required for STL lock

Documents & Resources