VIAVI OneExpert ONX handheld tester platform, side view
VIAVI / ONX-720/730 / Handheld Testers
UPG-ONX-630SWX-730-PON

OneExpert HFC UPG-ONX-630SWX-730-PON ONX-730 SWX Mainframe Upgrade with PON Selective Power Meter

OneExpert HFC ONX-730 SWX mainframe upgrade package with PON selective optical power meter, VFL, OneCheck Ethernet, OneCheck WiFi and 10G SpeedCheck.

Package contents
PON Selective Optical Power Meter, VFL, OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck, ONX 730 SWX Package, Protective Fitted Case, Cat6A jumper M-F and M-M
AC charger
AC Charger NOT included standard in Upgrade Packages and can be optionally added
Datasheet

Overview

The VIAVI UPG-ONX-630SWX-730-PON is a OneExpert HFC mainframe upgrade package that moves an ONX-630 SWX configuration to the ONX-730 platform. It is one of the PON Selective Power Meter packages in the OneExpert HFC (ONX-720/730) family, which tests DOCSIS, Ethernet, PON and WiFi 7 service throughput up to 10 Gbps.

This package includes the PON selective optical power meter and visual fault locator (VFL), OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck and the ONX 730 SWX software package. The selective power meter measures coexistent PON wavelengths separately and can read the PON-ID to confirm the connection to the expected OLT. TruePON analysis, which checks Total Optical Loss, PON-ID, OLT connectivity and received power against the ODN class, is available as an option.

DOCSIS and RF

The ONX-720/730 continues the RF and DOCSIS testing of the ONX-620/630 and supports existing ONX DOCSIS/RF modules. The upgrade mainframe works with the OneExpert CATV D3.1 modules listed by VIAVI.

Automation and construction

VIAVI Test Process Automation provides one-button OneCheck workflows that give automated pass/fail results with geo-tagged saved results. The unit is IP54 rated, drop-tested and modular. It has integrated GPS, StrataSync and mobile app support, a field-replaceable high-capacity battery, and an upgrade path to 25G/50G PON and DOCSIS 4.0.

Key Features

  • PON Selective Optical Power Meter with SC/APC connection
  • Visual Fault Locator (1 mW)
  • Broadband power capability for the selective PON hardware
  • Optical Loss mode (set/clear reference with delta)
  • OneCheck Ethernet and OneCheck WiFi 7 automated pass/fail testing
  • VIAVI SpeedCheck to 5 Gbps and 10 Gbps
  • ONX 730 SWX software package
  • Return Signal Generator with Loopback and Ingress Expert
  • PON-ID reading to validate connection to the expected OLT
  • TruePON PON-ID analysis with OLT-ID and loss (optional)
  • OneCheck PON with GPON/XGS-PON emulation using VIAVI SFP (optional)
  • 10GBase-T RJ-45 Ethernet testing from 100M to 10G
  • Compatible with existing ONX DOCSIS/RF modules
  • IP54 rated, drop-tested, modular design
  • Integrated GPS, StrataSync and VIAVI Mobile Tech app support
  • Field-replaceable 96 W/hr Li-Ion battery
  • Upgradeable for 25G/50G PON and DOCSIS 4.0

Specifications

Package Contents
Package contents PON Selective Optical Power Meter, VFL, OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck, ONX 730 SWX Package, Protective Fitted Case, Cat6A jumper M-F and M-M
AC charger AC Charger NOT included standard in Upgrade Packages and can be optionally added
OneExpert HFC uses same charger as OneExpert CATV
Package and Feature Matrix
PON Selective Optical Power Meter Standard
Broadband Optical Power Meter N/A
TruePON PON-ID Analysis with OLT-ID and Loss Opt.
Broadband Power Capability for Selective PON Hardware Standard
Optical Loss Mode (Set/clear Ref with Delta) Standard
The package description on page 6 does not list Optical Loss for this model
Visual Fault Locator (1mW) Standard
OneCheck WiFi7 Standard
OneCheck Ethernet Standard
Optical Ethernet Testing over SFP+ Opt.
OneCheck PON w/Emulation – GPON/XGS PON using VIAVI SFP Opt.
VIAVI SpeedCheck – 5 Gbps / 10 Gbps Standard
Ookla Speedtest, VIAVI TrueSpeed, iPerf Speedtest – 5 Gbps / 10 Gbps Opt.
Smart Access Anywhere - Remote Connectivity Opt.
HomeTDR Opt.
Home Leakage Test Opt.
Return Signal Generator w/Loopback Standard
Reverse Sweepless Sweep Opt.
QAM Video MPEG Verification Opt.
Ingress Expert Standard
Field View w/RSG Opt.
Ethernet
Standard IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
10GBase-T RJ-45 Electrical 100M, 1G, 2.5G, 5G, 10G
SFP+ Optical Ethernet 1G, 10G
SFP dependent; optional
SFP+ Electrical Ethernet 100M, 1G, 2.5G, 5G, 10G
Optional
WiFi
OneCheck WiFi (Connected Mode) WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands
Test Results Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf)
Throughput/Performance Tests
VIAVI SpeedCheck 5 Gbps, 10 Gbps
Ookla Speedtest 5 Gbps, 10 Gbps
VIAVI TrueSpeed (RFC-6349) 5 Gbps, 10 Gbps
iPerf client 5 Gbps, 10 Gbps
Test Results Delay, Upstream and Downstream Bit Rates
Bluetooth and Smart Device Support
Communication Interface Bluetooth v5.0, BLE 2.0
Smart Device Support VIAVI Mobile Tech app, Android 8 or newer, iOS12 or newer
Recommendation
Optical Fiber Scope Support
USB Optical Fiber Scope P5000i, FiberChek Probe
Results for Zone Defects / Scratches Pass/Fail
Low Mag Field-of-View (FOV) Horizontal 740 μm, Vertical 550 μm
High Mag Field-of-View (FOV) Horizontal 370 μm, Vertical 275 μm
Particle Size Detection <1 μm
Power Source USB port
Selective PON Power Meter
Photo Diode InGaAs
Spectral Range Passband (1260…1500 nm, 1540…1650 nm)
Wavelength Setting 1342, 1358, 1490, 1577 nm; Dual: 1490/1577, 1342/1577, 1358/1577 nm; Broadband: 1270...1650 nm, Custom step size 1 nm
Broadband in Broadband Mode (activated SW option required)
Resolution 0.01 dB, 0.001 µW
Measurement Range for Power Level -45…+3 dBm
Max. Power Level +15 dBm
Measurement Uncertainty 1490 nm: ±0.5 dB/±12 %; 1577 nm: ±0.5 dB/±12 %; 1342nm: ±0.5 dB/±12 %; 1358nm: ±0.5 dB/±12 %; Broadband: ±0.5 d/±5 %
Under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber, SC/APC connectors
Measurement Range for PON-ID GPON: -30...0 dBm; XGS-PON: -25...0 dBm
Number of Calibrated Wavelengths 2 (1490,1577 nm)
Tone Detection 270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; in Broadband Mode (activated SW option required)
Connection SC/APC
Visual Fault Locator (VFL)
Fiber Compatibility Single-mode, Multimode
Wavelength 650 nm (visible)
Output Modes Continuous and flashing
Connector Interface Universal 2.5 mm (fixed)
Output Power 1 mW
Laser Safety Rating Class 2
Range (maximum) 7 km
VFL range depends on many factors, including fiber quality/loss
General
Size 5.0 x 11.1 x 2.9 in (W x L x H)
OneExpert HFC Mainframe Upgrades
Weight 1.94 kg (4.25 lbs)
OneExpert HFC Mainframe Upgrades, without protective case
Operating Temperature Range Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C
Storage Temperature Range -20°C to 60°C
Operating Humidity Range 10% to 90% RH, non-condensing
For Indoor/Outdoor Use IP54 light rain (0.5 in/hr; 1.27 cm/hr)
Drop Rating 1 m (3.3 ft) onto concrete
Operating Altitude 4000 m max
RF immunity 8.5 V/m
For CATV measurements
DC Input Power 12 V@5 A
DC Charge Port 2.5 mm barrel
Battery 96 W/hr Li-Ion rechargeable battery, Field replaceable
Battery Charge Time 4 Hrs (90%) 6-8 Hrs 100% (AC charger)
Battery Life 3-5 day typical usage for installation technicians (10 installs a day)
USB Host Port(s) USB-C, USB-A (USB 3.0)
DOCSIS Module Compatibility
Compatible ONX DOCSIS/RF modules ONX-CATV-D31-S-4220-1012, ONX-CATV-D31-S-8520-1212, ONX-CATV-D31-S-4285-1012, ONX-CATV-D31-S-6520-1212, ONX-CATV-D31-4285-1012B
Module adapter ONXF-CATV-D31-ADAPTR available for existing D3.1 modules

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

  • Multi-gig residential service activation
  • Small business service installation
  • DOCSIS service turn-up and troubleshooting
  • GPON and XGS-PON service validation
  • WiFi 7 service delivery verification
  • 10G Ethernet throughput testing
  • HFC ingress and return path troubleshooting
  • Fiber connector inspection and fault location

Included

  • ONX 730 SWX software package
  • Protective Fitted Case
  • Cat6A jumper M-F
  • Cat6A jumper M-M

Options & Accessories

Option Description
ONXF-SW-SFP-ETH Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's
ONXF-SW-TRUEPON TruePON software option — Requires PON selective HW
ONXF-SW-OC-PON OneCheck PON – PON testing via GPON/XGSPON SFP+
ONXF-SW-OC-GPON-EMUL GPON Emulation for live service testing on GPON network
ONXF-SW-OC-XGSPON-EMUL XGS-PON emulation for live service testing — Listed in the datasheet as 'GPON Emulation for live service testing on GPON network'
ONX-SMART-ACCESS Smart Access Anywhere
ONXF-SW-OOKLA-SPD-5G-1Y ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G-3Y ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G-5Y ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G ONX Ookla Speedtest to 5 Gbps
ONXF-SW-OOKLA-SPD-10G-1Y ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G-3Y ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G-5Y ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License — Deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G ONX Ookla Speedtest to 10 Gbps
ONXF-SW-TRUESPEED-5G-1Y ONX TrueSpeed to 5 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-TRUESPEED-5G-3Y ONX TrueSpeed to 5 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-TRUESPEED-5G ONX TrueSpeed to 5 Gbps permanent License
ONXF-SW-TRUESPEED-10G-1Y ONX TrueSpeed to 10 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-TRUESPEED-10G-3Y ONX TrueSpeed to 10 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-TRUESPEED-10G ONX TrueSpeed to 10 Gbps Permanent License
ONXF-SW-IPERF-5G-1Y ONX iPerf test to 5 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-IPERF-5G-3Y ONX iPerf test to 5 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-IPERF-5G ONX iPerf test to 5 Gbps Permanent License
ONXF-SW-IPERF-10G-1Y ONX iPerf test to 10 Gbps 1 Yr Timed License — Deployed via StrataSync
ONXF-SW-IPERF-10G-3Y ONX iPerf test to 10 Gbps 3 Yr Timed License — Deployed via StrataSync
ONXF-SW-IPERF-10G ONX iPerf test to 10 Gbps permanent License
ONX-CATV-SW-HL-LKG Home Leakage Software Option
ONX-CATV-SW-HOMETDR Home TDR Software Option
ONX-CATV-SW-REVSWPLSSWP Reverse Sweepless Sweep Option for ONX 730's
ONX-CATV-SW-QAM-VIDEO QAM Video MPEG Verification Option
ONX-CATV-SW-RP-SNR-OCE Return Path SNR in OneCheck Expert - OneExpert CATV
ONX-CATV-SW-FV-RSG PathTrak Fieldview with Return Signal Generator for ONX 730s
ONX-CATV-FWD-SWEEP Active Forward Sweep
ONX-CATV-REV-SWEEP Active Reverse Sweep
NSC-SFP-GPON GPON SFP for GPON emulation
NSC-SFP-XGSPON XGSPON SFP+ for XGSPON emulation
NSC-SFP-850-1G-10G Optical Ethernet SFP+ 850 nm SR 1G and 10G
NSC-SFP-1310-1G-10G Optical Ethernet SFP+ 1310 nm LR 1G and 10G
NSC-SFP-1550-1G-10G Optical Ethernet SFP+ 1550 nm ER 1G and 10G
AC-CHARGER Replacement AC charger (no power cord)
AC-CAR-CHARGER Car Charger
CC-034601 Large Carrying Case
1019-00-1366 Strand Hook
ONXF-HANDSTRAP Handstrap for use on unit without a case
ONXF-HFC-BATT-96WHR Replacement 96 W/Hr Battery
ONXF-DISPLAY-PROTECTOR-5P Replacement screen protector (5 pack)
ONXF-ETH-ADAPT-M-F Ethernet Cat6a M-F adapter 0.5 m
NSC-ETHERNET-CABLE Ethernet Cat6a M-M Patch Cable
ONXF-CATV-D31-ADAPTR Module adapter for existing D3.1 modules for ONX-720/730
ONXF-HFC-CASE Fitted protective case for ONX-720/730 with DOCSIS 3.1

Documents & Resources