OneExpert HFC ONXF-730-PON-65-204-SWX DOCSIS 3.1 and PON Field Tester with Selective Power Meter, 65/204 MHz
OneExpert HFC ONX-730 SWX package with 65/204 MHz DOCSIS 3.1 module, PON selective power meter, VFL and 10 Gbps Ethernet/WiFi 7 testing.
- Standard
- IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
- Test Results
- Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
- 10GBase-T RJ-45 Electrical
- 100M, 1G, 2.5G, 5G, 10G
- SFP+ Optical Ethernet
- 1G, 10G (SFP dependent)
Overview
The VIAVI OneExpert HFC ONXF-730-PON-65-204-SWX is a new-unit ordering package of the OneExpert HFC ONX-730 handheld field tester. It combines DOCSIS, Ethernet, PON and WiFi 7 testing in one instrument and validates throughput up to 10 Gbps, aimed at residential and small business service activation and troubleshooting.
This package includes the ONX-CATV-D31-S-6520-1212 DOCSIS 3.1 module (65/204 MHz upstream, 1.2 GHz/1.2 GHz downstream), a PON selective optical power meter, a visual fault locator and optical loss mode, OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck and the ONX 730 SWX software package.
Optical testing
The integrated PON selective power meter measures coexisting wavelengths separately through a dedicated SC/APC optical port, and the PON-ID can be read to confirm connection to the expected OLT. With the TruePON option, the instrument automatically verifies total optical loss, PON-ID, OLT connectivity and received power based on the ODN class. The VFL and supported USB fiber scopes with automatic analysis help locate fiber faults and connector defects.
Test Process Automation
OneCheck workflows run automated pass/fail tests for DOCSIS, Ethernet, WiFi and PON and save results with geo tags. Smart Access Anywhere allows remote coaching via a PC or mobile connection.
Design
The ONX-720/730 keeps the RF and DOCSIS test features of the ONX-620/630, including support for existing RF modules. The IP54-rated, drop-tested modular housing can be upgraded for 25G/50G PON and DOCSIS 4.0, and the unit has integrated GPS, StrataSync support, mobile app support and a field-replaceable 96 W/hr battery.
Key Features
- PON Selective Optical Power Meter with SC/APC connection
- Visual Fault Locator (1 mW)
- Optical Loss Mode (Set/clear Ref with Delta)
- Broadband Power Capability for Selective PON Hardware
- ONX-CATV-D31-S-6520-1212 module (65/204 MHz D3.1)
- ONX 730 SWX Software Package
- OneCheck Ethernet and OneCheck WiFi7
- VIAVI SpeedCheck to 5 Gbps and 10 Gbps
- Return Signal Generator w/Loopback
- Ingress Expert
- Unified OneCheck Workflow automates pass/fail for DOCSIS, Ethernet, WiFi, and PON
- TruePON verifies PON-ID, loss and ODN Class (optional)
- PON emulation of ONT for GPON/XGS-PON (optional)
- Fiber scope support with Auto Analysis for defect detection
- Smart Access Anywhere remote coaching and training via PC or mobile connection (optional)
- IP54 rated, drop-tested, modular design
- Modular path supports 25G/50G PON and DOCSIS 4.0
- Integrated GPS, StrataSync and mobile app support
- 96 W/hr field-replaceable Li-Ion battery
Specifications
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test Results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G (SFP dependent)
Optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test Results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
| VIAVI SpeedCheck |
5 Gbps, 10 Gbps
Standard in this package
|
|---|---|
| Ookla Speedtest |
5 Gbps, 10 Gbps
Optional
|
| VIAVI TrueSpeed (RFC-6349) |
5 Gbps, 10 Gbps
Optional
|
| iPerf client |
5 Gbps, 10 Gbps
Optional
|
| Test Results | Delay, Upstream and Downstream Bit Rates |
| Communication Interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart Device Support (recommendation) | VIAVI Mobile Tech app, Android 8 or newer, iOS 12 or newer |
| USB Optical Fiber Scope | P5000i, FiberChek Probe |
|---|---|
| Results for Zone Defects / Scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle Size Detection | <1 μm |
| Power Source | USB port |
| Photo Diode | InGaAs |
|---|---|
| Spectral Range | Passband (1260…1500 nm, 1540…1650 nm) |
| Wavelength Setting |
1342, 1358, 1490, 1577 nm; Dual: 1490/1577, 1342/1577, 1358/1577 nm; Broadband: 1270...1650 nm, Custom step size 1 nm
Broadband Mode requires activated SW option
|
| Resolution | 0.01 dB, 0.001 µW |
| Measurement Range for Power Level | -45…+3 dBm |
| Max. Power Level | +15 dBm |
| Measurement Uncertainty |
1490 nm: ±0.5 dB/±12 %; 1577 nm: ±0.5 dB/±12 %; 1342 nm: ±0.5 dB/±12 %; 1358 nm: ±0.5 dB/±12 %; Broadband: ±0.5 d/±5 %
Under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (Single Mode, 9 µm core, 8° APC), with SC/APC connectors; Broadband value printed as '±0.5 d' in datasheet
|
| Measurement Range for PON-ID | GPON: -30...0 dBm; XGS-PON: -25...0 dBm |
| Number of Calibrated Wavelengths | 2 (1490, 1577 nm) |
| Tone Detection |
270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; in Broadband Mode (activated SW option required)
|
| Connection | SC/APC |
| Fiber Compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output Modes | Continuous and flashing |
| Connector Interface | Universal 2.5 mm (fixed) |
| Output Power | 1 mW |
| Laser Safety Rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
| Frequency Range | 0.5 to 1,218 MHz |
|---|---|
| Frequency Accuracy |
±10 ppm
typical @25°C
|
| Max Input Power | 60 dBmV total integrated power |
| Operation on Powered TAP | Operate with up to 90 VAC/DC on input port |
| Return Loss | >9 dB |
| Auto Channel Plan Builder | Auto detection of channels (analog, digital, QAM, OFDM) |
| Ingress Spectrum Scan | 0.5–204 MHz, calibrated range 4-204 MHz |
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min Detectable Level Upstream | −55 dBmV |
| Dynamic Range | 50 dB |
| Max Total Integrated Power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Accuracy |
±2 dB
typical at 25°C
|
| Sampling Rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Return Loss | >9.5 dB |
| Analog Standards | NTSC, PAL, SECAM |
|---|---|
| Analog Min Detectable Signal | −50 dBmV (single channel) |
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| Digital Calibrated Power Levels | -20 dBmV to +50 dBmV |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| Symbol Rates | Annex A: 5.057 to 6.952 MSPS for 64, 128, and 256 QAM; Annex B: 5.057 MSPS for 64 QAM and 5.361 MSPS for 256 QAM; Annex C: 5.274 MSPS for 64 QAM, and 5.361 MSPS for 256 QAM |
| Regional demods | DVB-C |
| OFDM Channels | 24-192 MHz wide − up to 3 active OFDM channels |
|---|---|
| OFDM MER |
16 to 44 dB
max, min, average, standard deviation, percentile
|
| Profile Analysis | Profiles A, B, C, D, NCP, and PLC (more profiles as implemented) |
| MER Specified range |
−5 to +20 dBmV; 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
MER range declines as input levels decrease; expected MER range at MINLOCK level of –15 dBmV is >30 dB MER
|
| MER Resolution | 0.1 dB |
| MER Accuracy |
±2 dB
typical at 25°C
|
| Minimum Lock Level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| BER — OneCheck Mode | Down to 1E-8 (pre and post FEC) Std. 1E-9 user selectable |
| RF (2) | F connectors replaceable |
|---|---|
| Port 2 | Upstream 0.5–204 MHz and TDR |
| Included DOCSIS module | ONX-CATV-D31-S-6520-1212 OneExpert CATV-D3.1 Sweep Ready Module 65/204 MHz 1.2/1.2 GHz |
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
| Forward Sweep Telemetry Frequency |
Diplexer dependent 50-1,218 MHz
Input Port 1; compatible with SCU-1800
|
| Reverse Sweep Port 2 Frequency Range |
5-204 MHz
Output Port 1 or Port 2 (user selectable)
|
| Reverse Sweep Compatibility | SCU-1800 or DAA/RPHY via XperTRAK |
| RF immunity | 8.5 V/m (for CATV measurements) |
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
With RF Module, without protective case
|
| Operating Temperature Range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity Range | 10% to 90% RH, non-condensing |
| For Indoor/Outdoor Use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop Rating | 1 m (3.3 ft) onto concrete |
| Operating Altitude | 4000 m max |
| DC Input Power | 12 V@5 A |
| DC Charge Port | 2.5 mm barrel |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery Charge Time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery Life | 3-5 day typical usage for installation technicians (10 installs a day) |
| USB Host Port(s) | USB-C, USB-A (USB 3.0) |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Residential service installation and activation
- Small business service testing
- Multi-gig DOCSIS service validation
- PON network verification
- Ethernet throughput testing up to 10 Gbps
- WiFi 7 service delivery testing
- HFC ingress troubleshooting
- Fiber fault location
Included
- PON Selective Optical Power Meter, VFL, Optical Loss
- OneCheck Ethernet, OneCheck WiFi
- 10G SpeedCheck
- ONX-CATV-D31-S-6520-1212 module (65/204 MHz D3.1)
- ONX 730 SWX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's |
| ONXF-SW-TRUEPON | TruePON software option (requires PON selective HW) |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | GPON Emulation for live service testing on GPON network — Description as printed in the datasheet for the XGS-PON emulation part number |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G-1Y | ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-3Y | ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-5Y | ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps |
| ONXF-SW-OOKLA-SPD-10G-1Y | ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-3Y | ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-5Y | ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps |
| ONXF-SW-TRUESPEED-5G-1Y | ONX TrueSpeed to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G-3Y | ONX TrueSpeed to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License |
| ONXF-SW-TRUESPEED-10G-1Y | ONX TrueSpeed to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G-3Y | ONX TrueSpeed to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License |
| ONXF-SW-IPERF-5G-1Y | ONX iPerf test to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G-3Y | ONX iPerf test to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License |
| ONXF-SW-IPERF-10G-1Y | ONX iPerf test to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G-3Y | ONX iPerf test to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-REVSWPLSSWP | Reverse Sweepless Sweep Option for ONX 730's |
| ONX-CATV-SW-QAM-VIDEO | QAM Video MPEG Verification Option |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert - OneExpert CATV |
| ONX-CATV-SW-FV-RSG | PathTrak Fieldview with Return Signal Generator for ONX 730s |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |