OneExpert HFC ONXF-730-PON-42-204-SWX DOCSIS 3.1 and PON Field Tester with SWX Package
ONX-730 handheld with PON selective power meter, VFL, optical loss, 10 Gbps Ethernet/WiFi 7 testing and a 42/204 MHz DOCSIS 3.1 module
- Standard
- IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
- Test Results
- Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
- 10GBase-T RJ-45 Electrical
- 100M, 1G, 2.5G, 5G, 10G
- SFP+ Optical Ethernet
- 1G, 10G
Overview
The VIAVI OneExpert HFC ONXF-730-PON-42-204-SWX is a new-unit package of the ONX-730 handheld tester. It validates DOCSIS, Ethernet, PON and WiFi 7 service throughput up to 10 Gbps and uses Test Process Automation (TPA) with one-button OneCheck workflows to standardise residential and small-business service activation.
This package combines a PON selective optical power meter, a visual fault locator and optical loss mode with OneCheck Ethernet, OneCheck WiFi and 10G SpeedCheck. It ships with the ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz upstream, 1.0/1.2 GHz downstream) and the ONX 730 SWX software package.
Optical tools
The selective power meter measures coexistent PON wavelengths on a dedicated SC/APC port and reads the PON-ID to confirm the connection to the expected OLT. With the TruePON option, the unit verifies total optical loss, PON-ID, OLT connectivity and received power against the ODN class. It also supports a USB fiber scope with automatic pass/fail analysis.
DOCSIS and RF
The ONX-720/730 keeps the RF and DOCSIS test functions of the ONX-620/630 and supports existing RF modules. The IP54-rated, drop-tested modular design can be upgraded for 25G/50G PON and DOCSIS 4.0. It includes GPS, StrataSync and mobile app support.
Key Features
- PON Selective Optical Power Meter with SC/APC connection
- Visual Fault Locator (1 mW)
- Optical Loss Mode (set/clear reference with delta)
- Broadband power capability for the selective PON hardware
- OneCheck Ethernet and OneCheck WiFi 7
- VIAVI SpeedCheck to 5 Gbps and 10 Gbps
- ONX 730 SWX software package
- Return Signal Generator with Loopback
- Ingress Expert
- ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz)
- PON-ID reading to validate connection to the expected OLT
- Fiber scope support with Auto Analysis and defect detection
- IP54 rated, drop-tested modular design
- Upgradeable for 25G/50G PON and DOCSIS 4.0
- Integrated GPS, StrataSync and VIAVI Mobile Tech app support
- Field-replaceable 96 W/hr Li-Ion battery for multi-day use
Specifications
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test Results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G
SFP dependent; optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test Results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
| VIAVI SpeedCheck |
5 Gbps, 10 Gbps
Standard
|
|---|---|
| Ookla Speedtest |
5 Gbps, 10 Gbps
Optional
|
| VIAVI TrueSpeed (RFC-6349) |
5 Gbps, 10 Gbps
Optional
|
| iPerf client |
5 Gbps, 10 Gbps
Optional
|
| Test Results | Delay, Upstream and Downstream Bit Rates |
| Communication Interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart Device Support |
VIAVI Mobile Tech app; Android 8 or newer; iOS 12 or newer
Recommendation
|
| USB Optical Fiber Scope | P5000i, FiberChek Probe |
|---|---|
| Results for Zone Defects / Scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle Size Detection | <1 μm |
| Power Source | USB port |
| Photo Diode | InGaAs |
|---|---|
| Spectral Range | Passband (1260…1500 nm, 1540…1650 nm) |
| Wavelength Setting |
1342, 1358, 1490, 1577 nm; Dual: 1490/1577, 1342/1577, 1358/1577 nm; Broadband: 1270...1650 nm, Custom step size 1 nm
Broadband in Broadband Mode (activated SW option required)
|
| Resolution | 0.01 dB, 0.001 µW |
| Measurement Range for Power Level | -45…+3 dBm |
| Max. Power Level | +15 dBm |
| Measurement Uncertainty |
1490 nm: ±0.5 dB/±12 %; 1577 nm: ±0.5 dB/±12 %; 1342 nm: ±0.5 dB/±12 %; 1358 nm: ±0.5 dB/±12 %; Broadband: ±0.5 d/±5 %
Under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75% RH, SM test fiber, SC/APC connectors
|
| Measurement Range for PON-ID | GPON: -30...0 dBm; XGS-PON: -25...0 dBm |
| Number of Calibrated Wavelengths | 2 (1490, 1577 nm) |
| Tone Detection |
270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; in Broadband Mode (activated SW option required)
|
| Connection | SC/APC |
| Fiber Compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output Modes | Continuous and flashing |
| Connector Interface | Universal 2.5 mm (fixed) |
| Output Power | 1 mW |
| Laser Safety Rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
With RF Module, without protective case
|
| Operating Temperature Range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity Range | 10% to 90% RH, non-condensing |
| For Indoor/Outdoor Use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop Rating | 1 m (3.3 ft) onto concrete |
| Operating Altitude | 4000 m max |
| Pollution | 2° |
| RF immunity |
8.5 V/m
For CATV measurements
|
| DC Input Power | 12 V@5 A |
|---|---|
| DC Charge Port | 2.5 mm barrel |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery Charge Time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery Life | 3-5 day typical usage for installation technicians (10 installs a day) |
| USB Host Port(s) | USB-C, USB-A (USB 3.0) |
| Frequency Range | 0.5 to 1,218 MHz |
|---|---|
| Frequency Accuracy | ±10 ppm typical @25°C |
| Max Input Power | 60 dBmV total integrated power |
| Operation on Powered TAP | Operate with up to 90 VAC/DC on input port |
| Return Loss | >9 dB |
| Auto Channel Plan Builder | Auto detection of channels (analog, digital, QAM, OFDM) |
| Ingress Spectrum Scan | 0.5–204 MHz, calibrated range 4-204 MHz |
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min Detectable Level Upstream | −55 dBmV |
| Dynamic Range | 50 dB |
| Max Total Integrated Power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Accuracy | ±2 dB typical at 25°C |
| Sampling Rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Return Loss | >9.5 dB |
| Analog Standards | NTSC, PAL, SECAM |
|---|---|
| Analog Min Detectable Signal | −50 dBmV (single channel) |
| Digital Calibrated Power Levels | -20 dBmV to +50 dBmV |
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| OFDM Channels | 24-192 MHz wide − up to 3 active OFDM channels |
| OFDM Profile Analysis | Profiles A, B, C, D, NCP, and PLC (more profiles as implemented) |
| MER Specified range |
21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
At −5 to +20 dBmV; MER range declines as input levels decrease
|
| Minimum Lock Level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| RF Ports | RF(2) F connectors replaceable |
|---|---|
| Port 2 | Upstream 0.5–204 MHz and TDR |
| Included DOCSIS module |
ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
42/204 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1
|
| Diplexer 42 MHz | upstream 4-42 MHz; downstream 54–1,004 MHz |
| Diplexer 204 MHz | upstream 4-204 MHz: downstream 258-1,218 MHz |
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
| Forward Sweep Telemetry Frequency |
Diplexer dependent 50-1,218 MHz
Compatibility: SCU-1800
|
| Reverse Sweep Port 2 Frequency Range |
5-204 MHz
Compatibility: SCU-1800 or DAA/RPHY via XperTRAK
|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- DOCSIS service activation and troubleshooting
- PON service turn-up and OLT link verification
- Multi-gig Ethernet throughput validation
- WiFi 7 in-home service verification
- Residential and small business installations
- Upstream ingress and return path testing
Included
- PON Selective Optical Power Meter, VFL, Optical Loss
- OneCheck Ethernet, OneCheck WiFi
- 10G SpeedCheck
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- ONX 730 SWX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-TRUEPON | TruePON software option — Requires PON selective HW |
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | GPON Emulation for live service testing on GPON network — Name as printed in the datasheet |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps — Also as 1/3/5 Yr timed licenses (-1Y, -3Y, -5Y) |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps — Also as 1/3/5 Yr timed licenses (-1Y, -3Y, -5Y) |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-REVSWPLSSWP | Reverse Sweepless Sweep Option for ONX 730's |
| ONX-CATV-SW-QAM-VIDEO | QAM Video MPEG Verification Option |
| ONX-CATV-SW-FV-RSG | PathTrak Fieldview with Return Signal Generator for ONX 730s |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |