ONXF-720-BB-42-85-TSX
OneExpert HFC ONXF-720-BB-42-85-TSX DOCSIS 3.1 and Fiber Tester with Broadband Power Meter, 42/85 MHz TSX Package
OneExpert HFC ONX-720 TSX package with a broadband optical power meter, VFL and a 42/85 MHz DOCSIS 3.1 module for multi-gig service testing up to 10 Gbps.
- Standard
- IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
- Test Results
- Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
- 10GBase-T RJ-45 Electrical
- 100M, 1G, 2.5G, 5G, 10G
- SFP+ Optical Ethernet
- 1G, 10G
Overview
The VIAVI ONXF-720-BB-42-85-TSX is a new-unit ordering package of the OneExpert HFC ONX-720 handheld tester. It pairs the ONX-720 mainframe with the ONX-CATV-D31-S-4285-1012 DOCSIS 3.1 module (42/85 MHz upstream, 1.0/1.2 GHz downstream), a broadband optical power meter and a visual fault locator, along with the ONX 720 TSX software package.
The OneExpert HFC platform validates DOCSIS, Ethernet, PON and WiFi 7 throughput up to 10 Gbps. VIAVI Test Process Automation (TPA) provides one-button OneCheck workflows that apply pass/fail criteria to Ethernet, WiFi and DOCSIS testing and save geo-tagged results.
Optical and fiber tools
The integrated broadband power meter covers 800 to 1650 nm with eight calibrated wavelengths. The 650 nm visual fault locator and support for USB fiber inspection scopes with automatic analysis help locate fiber faults and connector defects.
DOCSIS and RF
The ONX-720/730 carries forward the RF and DOCSIS test functions of the ONX-620/630, including support for existing RF modules. Measurements include downstream QAM and OFDM channel analysis, upstream ingress scanning and MER/BER analysis.
Design
The unit is IP54 rated, drop tested to 1 m onto concrete, and uses a field-replaceable 96 W/hr Li-Ion battery. It connects via Bluetooth to the VIAVI Mobile Tech app, has integrated GPS, and supports StrataSync.
Key Features
- Broadband optical power meter with eight calibrated wavelengths
- Visual fault locator (1 mW, 650 nm)
- ONX-CATV-D31-S-4285-1012 DOCSIS 3.1 module, 42/85 MHz upstream
- ONX 720 TSX software package
- OneCheck Ethernet and OneCheck WiFi included
- 10G VIAVI SpeedCheck included
- Unified OneCheck workflow automates pass/fail for DOCSIS, Ethernet, WiFi and PON
- 10GBase-T RJ-45 Ethernet testing at 100M, 1G, 2.5G, 5G and 10G
- WiFi 7 2x2 testing on 2.4, 5 and 6 GHz bands
- Fiber scope support with Auto Analysis for defect detection
- Smart Access Anywhere remote coaching and training via PC or mobile (optional)
- IP54 rated, drop-tested, modular design
- Integrated GPS, StrataSync and mobile app support
- 96 W/hr field-replaceable Li-Ion battery for multi-day use
Specifications
Ethernet
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test Results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G
SFP dependent; optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
WiFi
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test Results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
Throughput/Performance Tests
| TCP Throughput Test |
VIAVI SpeedCheck: 5 Gbps, 10 Gbps; Ookla Speedtest: 5 Gbps, 10 Gbps; VIAVI TrueSpeed (RFC-6349): 5 Gbps, 10 Gbps
Ookla Speedtest and TrueSpeed are options
|
|---|---|
| Performance | Up to 10 Gbps for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf client: 5 Gbps, 10 Gbps |
| Test Results | Delay, Upstream and Downstream Bit Rates |
Bluetooth Communications
| Communication Interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart Device Support |
VIAVI Mobile Tech app, Android 8 or newer, iOS 12 or newer
Recommendation
|
Optical Fiber Scope Support
| USB Optical Fiber Scope | P5000i, FiberChek Probe |
|---|---|
| Results for Zone Defects | Pass/Fail |
| Results for Zone Scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle Size Detection | <1 μm |
| Power Source | USB port |
Broadband Power Meter
| Photo Diode | InGaAs |
|---|---|
| Spectral Range | Broadband (800…1650 nm) |
| Wavelength Setting | 850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm; Custom 800…1650 nm, step size 1 nm |
| Resolution | 0.01 dB, 0.001 μW |
| Measurement Range for Power Level | -65…+10 dBm |
| Max. Power Level | +16 dBm |
| Measurement Uncertainty |
±0.2 dB/±5% (intrinsic)
Under reference conditions: -11 dBm (CW), 1310 nm ±1 nm, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (Single Mode, 9 µm core, 8° APC), when used with SC/PC connectors
|
| Number of Calibrated Wavelengths | 8 (850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm) |
| Tone Detection |
270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; received optical power level ≥ -50 dBm; when used with VIAVI Light Source and received optical power level > -50 dBm
|
| Connection | UPP 2.5 mm |
Visual Fault Locator (VFL)
| Fiber Compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output Modes | Continuous and flashing |
| Connector Interface | Universal 2.5 mm (fixed) |
| Controls | On/Off Continuous/Flashing |
| Output Power | 1 mW |
| Laser Safety Rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
General
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
With RF Module, without protective case
|
| Operating Temperature Range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity Range | 10% to 90% RH, non-condensing |
| For Indoor/Outdoor Use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop Rating | 1 m (3.3 ft) onto concrete |
| Operating Altitude | 4000 m max |
| Pollution | 2° |
| RF immunity |
8.5 V/m
For CATV measurements
|
| DC Input Power | 12 V@5 A |
| DC Charge Port | 2.5 mm barrel |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery Charge Time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery Life | 3-5 day typical usage for installation technicians (10 installs a day) |
| USB Host Port(s) | USB-C, USB-A (USB 3.0) |
Package Configuration
| DOCSIS Module |
ONX-CATV-D31-S-4285-1012 module (42/85 MHz D3.1)
42/85 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1 Packages
|
|---|---|
| Fiber Optic Testing | Broadband Optical Power Meter, VFL |
| Service Testing | OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck |
| Software Package | ONX 720 TSX Package |
DOCSIS/RF Frequency
| Range | 0.5 to 1,218 MHz |
|---|---|
| Accuracy |
±10 ppm
Typical @25°C
|
Downstream Analysis — Port 1
| Max Input Power | 60 dBmV total integrated power |
|---|---|
| Operation on Powered TAP | Operate with up to 90 VAC/DC on input port |
| Power Detection/Notification | Notify of AC/DC power presence on port 1 above 2 Volts |
| Return Loss | >9 dB |
| Auto Channel Plan Builder | Auto detection of channels (analog, digital, QAM, OFDM) |
Upstream Analysis — Port 2
| Ingress Spectrum Scan | 0.5–204 MHz, calibrated range 4-204 MHz |
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min Detectable Level Upstream | −55 dBmV |
| Dynamic Range | 50 dB |
| Max Total Integrated Power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Accuracy |
±2 dB
Typical at 25°C
|
| Sampling Rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Return Loss | >9.5 dB |
Analog Channel Measurement
| Standards | NTSC, PAL, SECAM |
|---|---|
| Min Detectable Signal |
−50 dBmV
Single channel
|
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
Downstream Digital Channel Analysis
| Calibrated Power Levels | -20 dBmV to +50 dBmV |
|---|---|
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| Regional demods | DVB-C |
| OFDM Channels | 24-192 MHz wide − up to 3 active OFDM channels |
| Profile Analysis | Profiles A, B, C, D, NCP, and PLC (more profiles as implemented) |
MER and BER
| MER Specified Range |
−5 to +20 dBmV: 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
MER range declines as input levels decrease. Expected MER range at MINLOCK level of –15 dBmV is >30 dB MER.
|
|---|---|
| Max Displayable Range | 50 dB |
| Resolution | 0.1 dB |
| Accuracy |
±2 dB
Typical at 25°C
|
| Minimum Lock Level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| BER — OneCheck Mode | Down to 1E-8 (pre and post FEC) Std. 1E-9 user selectable |
| Interleaver Depth | 128, 8 max |
RF Module Inputs/Outputs
| RF(2) | F connectors replaceable |
|---|---|
| Port 1 | Downstream 54/85/108/258MHz depending on diplexer |
| Port 2 | Upstream 0.5–204 MHz and TDR |
| Diplexer 42 MHz |
upstream 4-42 MHz; downstream 54–1,004 MHz
Diplexer return path options may not be available on all units
|
| Diplexer 85 MHz |
upstream 4-85 MHz; downstream 108-1,218 MHz
Diplexer return path options may not be available on all units
|
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
Sweep
| Forward Sweep Telemetry Frequency | Diplexer dependent 50-1,218 MHz |
|---|---|
| Forward Sweep Input Port | Port 1 |
| Forward Sweep Compatibility | SCU-1800 |
| Reverse Sweep Output Transmit Port | Port 1 or Port 2 (user selectable) |
| Port 1 Sweep Frequency Range | Diplexer dependent 5-42/5-65/5-85/5-204 MHz |
| Port 2 Sweep Frequency Range | 5-204 MHz |
| Reverse Sweep Compatibility | SCU-1800 or DAA/RPHY via XperTRAK |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- DOCSIS service activation and troubleshooting
- Multi-gig residential service turn-up
- Small business service testing
- Ethernet throughput validation up to 10 Gbps
- WiFi 7 service delivery verification
- Fiber optical power measurement
- Fiber fault location and connector inspection
- Home ingress and leakage troubleshooting
Included
- ONX-CATV-D31-S-4285-1012 module (42/85 MHz D3.1)
- Broadband Optical Power Meter
- VFL
- OneCheck Ethernet
- OneCheck WiFi
- 10G SpeedCheck
- ONX 720 TSX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's |
| ONXF-SW-OPTICAL-LOSS | Optical Loss test mode option to save reference and calculate loss |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | GPON Emulation for live service testing on GPON network — Name as printed in the datasheet |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G-1Y | ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-3Y | ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-5Y | ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps |
| ONXF-SW-OOKLA-SPD-10G-1Y | ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-3Y | ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-5Y | ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps |
| ONXF-SW-TRUESPEED-5G-1Y | ONX TrueSpeed to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G-3Y | ONX TrueSpeed to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License |
| ONXF-SW-TRUESPEED-10G-1Y | ONX TrueSpeed to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G-3Y | ONX TrueSpeed to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License |
| ONXF-SW-IPERF-5G-1Y | ONX iPerf test to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G-3Y | ONX iPerf test to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License |
| ONXF-SW-IPERF-10G-1Y | ONX iPerf test to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G-3Y | ONX iPerf test to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-RSG-LOOP | Return Signal Generator with Loopback Option |
| ONX-CATV-SW-INGRESS-EXP | Ingress Expert Option for ONX 720's |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert - OneExpert CATV |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |
Documents & Resources
Related Products
FiberChek Probe
VIAVI FiberChek Probe Handheld Fiber Inspection Microscope
Handheld all-in-one fiber inspection microscope with touch screen, auto-focus, auto-center and built-in pass/fail end-face analysis.
INX 660
VIAVI INX 660 Probe Microscope for Automated Single Fiber Connector Inspection
Handheld fiber inspection probe microscope that automates single fiber connector inspection and analysis, with semi-automated multifiber inspection.
Optimeter
VIAVI Optimeter Intelligent Optical Fiber Meter for Fiber Link Certification and Troubleshooting
Optical fiber meter that certifies and troubleshoots a fiber link in under one minute with a single fiber connection and one key press.
SCU-1800
VIAVI SCU-1800 Sweep Control Unit for Headend/Hub CATV Forward and Return Sweep
1RU headend/hub sweep control unit with forward sweep to 1,218 MHz and return sweep to 204 MHz on up to 16 ports.