VIAVI OneExpert ONX-700 series handheld tester, side view
VIAVI / ONX-720/730 / Handheld
ONXF-720-BB-42-204-TSX

OneExpert HFC ONXF-720-BB-42-204-TSX DOCSIS 3.1 and Fiber Field Tester with Broadband Power Meter, TSX Package

OneExpert HFC ONX-720 package with 42/204 MHz DOCSIS 3.1 module, broadband optical power meter, VFL and 10 Gbps Ethernet and WiFi 7 testing

Standard
IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results
Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
10GBase-T RJ-45 Electrical
100M, 1G, 2.5G, 5G, 10G
SFP+ Optical Ethernet
1G, 10G
Datasheet

Overview

The VIAVI ONXF-720-BB-42-204-TSX is a new-unit package of the OneExpert HFC ONX-720 handheld tester. It combines the ONX-720 mainframe with the ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz), a broadband optical power meter, a visual fault locator (VFL) and the ONX 720 TSX software package.

The OneExpert HFC platform validates DOCSIS, Ethernet, PON and WiFi 7 service throughput up to 10 Gbps in under a minute. VIAVI Test Process Automation (TPA) and the OneCheck workflows give technicians one-button pass/fail testing for Ethernet, WiFi and DOCSIS, with geotagged saved results.

Optical tools

The broadband power meter in this package covers 800 to 1650 nm through a 2.5 mm universal port, and the built-in 650 nm VFL helps locate breaks and faults. USB fiber scopes such as the P5000i and the FiberChek Probe connect to the unit for connector inspection with automatic pass/fail analysis.

DOCSIS and RF

The ONX-720/730 carries forward the RF and DOCSIS testing of the ONX-620/630 and supports existing RF modules. Its features include downstream and upstream analysis, OFDM signal metrics and profile analysis, and forward and reverse sweep with the SCU-1800.

Design

The unit is rated IP54, weatherproof and drop-tested. It has a modular design with an upgrade path to 25G/50G PON and DOCSIS 4.0. It also has integrated GPS, StrataSync and mobile app support, and a field-replaceable 96 W/hr battery for multi-day use.

Key Features

  • Validates DOCSIS, Ethernet, PON and WiFi 7 throughput up to 10 Gbps in under a minute
  • Unified OneCheck workflow automates pass/fail testing for DOCSIS, Ethernet and WiFi
  • Broadband optical power meter with 8 calibrated wavelengths
  • Visual fault locator (1 mW, 650 nm)
  • 10GBase-T RJ-45 Ethernet testing at 100M, 1G, 2.5G, 5G and 10G
  • WiFi 7 2x2 testing on 2.4, 5 and 6 GHz bands
  • VIAVI SpeedCheck to 5 Gbps and 10 Gbps included
  • USB fiber scope support with Auto Analysis and defect detection
  • DOCSIS 3.1 module with 42/204 MHz diplexing and 1.0/1.2 GHz downstream
  • Compatible with existing ONX DOCSIS/RF modules
  • IP54 rated, weatherproof and drop-tested modular design
  • Upgrade path for 25G/50G PON and DOCSIS 4.0
  • Integrated GPS, StrataSync and VIAVI Mobile Tech app support
  • Smart Access Anywhere remote coaching via PC or mobile connection (optional)
  • Field-replaceable 96 W/hr Li-Ion battery for 3-5 days of typical use

Specifications

Ethernet
Standard IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
10GBase-T RJ-45 Electrical 100M, 1G, 2.5G, 5G, 10G
SFP+ Optical Ethernet 1G, 10G
SFP dependent; optional
SFP+ Electrical Ethernet 100M, 1G, 2.5G, 5G, 10G
Optional
WiFi
OneCheck WiFi (Connected Mode) WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands
Test Results Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf)
Throughput/Performance Tests
TCP Throughput Test VIAVI SpeedCheck: 5 Gbps, 10 Gbps; Ookla Speedtest: 5 Gbps, 10 Gbps; VIAVI TrueSpeed (RFC-6349): 5 Gbps, 10 Gbps
Ookla Speedtest and TrueSpeed are options; SpeedCheck 5/10 Gbps is standard
Performance Up to 10 Gbps for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf client: 5 Gbps, 10 Gbps
Test Results Delay, Upstream and Downstream Bit Rates
Bluetooth and Smart Device Support
Communication Interface Bluetooth v5.0, BLE 2.0
Smart Device Support VIAVI Mobile Tech app, Android 8 or newer, iOS12 or newer
Recommendation
Optical Fiber Scope Support
USB Optical Fiber Scope P5000i, FiberChek Probe
Results for Zone Defects Pass/Fail
Results for Zone Scratches Pass/Fail
Low Mag Field-of-View (FOV) Horizontal 740 μm, Vertical 550 μm
High Mag Field-of-View (FOV) Horizontal 370 μm, Vertical 275 μm
Particle Size Detection <1 μm
Power Source USB port
Broadband Power Meter
Photo Diode InGaAs
Spectral Range Broadband (800…1650 nm)
Wavelength Setting 850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm; Custom 800…1650 nm, step size 1 nm
Resolution 0.01 dB, 0.001 μW
Measurement Range for Power Level -65…+10 dBm
Max. Power Level +16 dBm
Measurement Uncertainty ±0.2 dB/±5% (intrinsic)
Under reference conditions: -11 dBm (CW), 1310 nm ±1 nm, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (Single Mode, 9 µm core, 8° APC), when used with SC/PC connectors
Number of Calibrated Wavelengths 8 (850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm)
Tone Detection 270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; received optical power level ≥ -50 dBm; when used with VIAVI Light Source
Connection UPP 2.5 mm
Visual Fault Locator (VFL)
Fiber Compatibility Single-mode, Multimode
Wavelength 650 nm (visible)
Output Modes Continuous and flashing
Connector Interface Universal 2.5 mm (fixed)
Controls On/Off Continuous/Flashing
Output Power 1 mW
Laser Safety Rating Class 2
Range (maximum) 7 km
VFL range depends on many factors, including fiber quality/loss
Physical
Size 5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
Weight 3.15 kg (6.9 lb)
With RF Module, without protective case
USB Host Port(s) USB-C, USB-A (USB 3.0)
Environmental
Operating Temperature Range Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C
Storage Temperature Range -20°C to 60°C
Operating Humidity Range 10% to 90% RH, non-condensing
For Indoor/Outdoor Use IP54 light rain (0.5 in/hr; 1.27 cm/hr)
Drop Rating 1 m (3.3 ft) onto concrete
Operating Altitude 4000 m max
Pollution 2°
RF immunity 8.5 V/m
For CATV measurements
Power
DC Input Power 12 V@5 A
DC Charge Port 2.5 mm barrel
Battery 96 W/hr Li-Ion rechargeable battery, Field replaceable
Battery Charge Time 4 Hrs (90%) 6-8 Hrs 100% (AC charger)
Battery Life 3-5 day typical usage for installation technicians (10 installs a day)
Package Contents and Feature Matrix
DOCSIS Module ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
42/204 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1 Package
Fiber Optic Testing Broadband Optical Power Meter, VFL
Software Package ONX 720 TSX Package
Standard Service Tests OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck
Optional Service Tests Optical Ethernet Testing over SFP+, OneCheck PON w/Emulation – GPON/XGS PON using VIAVI SFP, Ookla Speedtest, VIAVI TrueSpeed, iPerf Speedtest, Smart Access Anywhere
Opt. in Package and Feature Matrix
Optional CATV Features HomeTDR, Home Leakage Test, Return Signal Generator w/Loopback, Ingress Expert
Opt. in Package and Feature Matrix; Reverse Sweepless Sweep, QAM Video MPEG Verification and Field View w/RSG are N/A for this model
DOCSIS/RF Frequency
Range 0.5 to 1,218 MHz
Accuracy ±10 ppm typical @25°C
Downstream Analysis — Port 1
Max Input Power 60 dBmV total integrated power
Operation on Powered TAP Operate with up to 90 VAC/DC on input port
Power Detection/Notification Notify of AC/DC power presence on port 1 above 2 Volts
Return Loss >9 dB
Auto Channel Plan Builder Auto detection of channels (analog, digital, QAM, OFDM)
Upstream Analysis — Port 2
Ingress Spectrum Scan 0.5–204 MHz, calibrated range 4-204 MHz
Sensitivity −45 dBmV
RBW 300 kHz
Min Detectable Level Upstream −55 dBmV
Dynamic Range 50 dB
Max Total Integrated Power 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz
Accuracy ±2 dB typical at 25°C
Sampling Rate Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz
Return Loss >9.5 dB
Operation on Powered TAP Operate with up to 90 V AC/DC on input port
Power Detection/Notification Notify of AC/DC power presence on port 2 above 2 Volts
Analog Channel Measurement
Standards NTSC, PAL, SECAM
Video and audio levels (dual)
Min Detectable Signal −50 dBmV (single channel)
Level Accuracy ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C
RBW 300 kHz
Downstream Digital Channel Analysis
Calibrated Power Levels -20 dBmV to +50 dBmV
Level Accuracy ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C
Modulation(s) 64, 128, and 256 QAM, OFDM
Annex A 5.057 to 6.952 MSPS for 64, 128, and 256 QAM
Annex B 5.057 MSPS for 64 QAM and 5.361 MSPS for 256 QAM
Annex C 5.274 MSPS for 64 QAM, and 5.361 MSPS for 256 QAM
Regional demods DVB-C
Measurements Full span MER; Ingress under carrier — full span ingress noise trace; Group delay and in-channel response (ICR); Digital quality index (DQI) overtime; Errored/severely errored seconds; Level, measured symbol rate, carrier frequency, modulation, interleaver depth
OFDM Signal Performance Metrics
OFDM Channels 24-192 MHz wide − up to 3 active OFDM channels
Level — max, min, average, standard deviation Relative to a 6 MHz carrier per CableLabs®
MER — max, min, average, standard deviation, percentile 16 to 44 dB
MER Channel Band Graph Max, min, avg across entire OFDM carrier MER per subcarrier
ICFR In-carrier frequency response (dB)
Spectrum/IUC Spectrum display, including carrier and ingress under carrier
Profile Analysis Profiles A, B, C, D, NCP, and PLC (more profiles as implemented); Lock status, code word errors (corrected and uncorrected)
MER and BER
MER Specified range −5 to +20 dBmV 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
MER range declines as input levels decrease. Expected MER range at MINLOCK level of –15 dBmV is >30 dB MER.
Max Displayable Range 50 dB
Resolution 0.1 dB
Accuracy ±2 dB typical at 25°C
Minimum Lock Level −15 dBmV
BER — Channel Check and DOCSIS Check mode Down to 1E-9 (pre and post FEC)
BER — OneCheck Mode Down to 1E-8 (pre and post FEC) Std. 1E-9 user selectable
Interleaver Depth 128, 8 max
RF Module Inputs/Outputs
RF(2) F connectors replaceable
Port 1 Downstream 54/85/108/258MHz depending on diplexer
Port 2 Upstream 0.5–204 MHz and TDR
Diplexer 42 MHz upstream 4-42 MHz; downstream 54–1,004 MHz
Diplexer return path options may not be available on all units
Diplexer 204 MHz upstream 4-204 MHz: downstream 258-1,218 MHz
Diplexer return path options may not be available on all units
MoCA filter All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency
Sweep
Forward Sweep Telemetry Frequency Diplexer dependent 50-1,218 MHz
Forward Sweep Input Port Port 1
Forward Sweep Compatibility SCU-1800
Reverse Sweep Output Transmit Port Port 1 or Port 2 (user selectable)
Port 1 Sweep Frequency Range Diplexer dependent 5-42/5-65/5-85/5-204 MHz
Port 2 Sweep Frequency Range 5-204 MHz
Reverse Sweep Compatibility SCU-1800 or DAA/RPHY via XperTRAK

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

  • Multi-gig residential service activation
  • Small business service installation
  • DOCSIS 3.1 HFC network troubleshooting
  • Ethernet and WiFi 7 service validation
  • Fiber optical power and continuity verification
  • Upstream ingress troubleshooting
  • Forward and reverse sweep with SCU-1800

Included

  • ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
  • Broadband Optical Power Meter
  • VFL
  • OneCheck Ethernet
  • OneCheck WiFi
  • 10G SpeedCheck
  • ONX 720 TSX Package
  • Protective Fitted Case
  • Cat6A jumper M-F and M-M

Options & Accessories

Option Description
ONXF-SW-OC-WIFI OneCheck WiFi Software option
ONXF-SW-OC-ETHERNET OneCheck Ethernet Software option
ONXF-SW-SFP-ETH Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's
ONXF-SW-OPTICAL-LOSS Optical Loss test mode option to save reference and calculate loss
ONXF-SW-OC-PON OneCheck PON – PON testing via GPON/XGSPON SFP+
ONXF-SW-OC-GPON-EMUL GPON Emulation for live service testing on GPON network
ONXF-SW-OC-XGSPON-EMUL GPON Emulation for live service testing on GPON network
ONX-SMART-ACCESS Smart Access Anywhere
ONXF-SW-OOKLA-SPD-5G-1Y ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G-3Y ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G-5Y ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-5G ONX Ookla Speedtest to 5 Gbps
ONXF-SW-OOKLA-SPD-10G-1Y ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G-3Y ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G-5Y ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License/deployed via StrataSync
ONXF-SW-OOKLA-SPD-10G ONX Ookla Speedtest to 10 Gbps
ONXF-SW-TRUESPEED-5G-1Y ONX TrueSpeed to 5 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-TRUESPEED-5G-3Y ONX TrueSpeed to 5 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-TRUESPEED-5G ONX TrueSpeed to 5 Gbps permanent License
ONXF-SW-TRUESPEED-10G-1Y ONX TrueSpeed to 10 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-TRUESPEED-10G-3Y ONX TrueSpeed to 10 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-TRUESPEED-10G ONX TrueSpeed to 10 Gbps Permanent License
ONXF-SW-IPERF-5G-1Y ONX iPerf test to 5 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-IPERF-5G-3Y ONX iPerf test to 5 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-IPERF-5G ONX iPerf test to 5 Gbps Permanent License
ONXF-SW-IPERF-10G-1Y ONX iPerf test to 10 Gbps 1 Yr Timed License/deployed via StrataSync
ONXF-SW-IPERF-10G-3Y ONX iPerf test to 10 Gbps 3 Yr Timed License/deployed via StrataSync
ONXF-SW-IPERF-10G ONX iPerf test to 10 Gbps permanent License
ONX-CATV-SW-HL-LKG Home Leakage Software Option
ONX-CATV-SW-HOMETDR Home TDR Software Option
ONX-CATV-SW-RSG-LOOP Return Signal Generator with Loopback Option
ONX-CATV-SW-INGRESS-EXP Ingress Expert Option for ONX 720's
ONX-CATV-SW-RP-SNR-OCE Return Path SNR in OneCheck Expert - OneExpert CATV
ONX-CATV-FWD-SWEEP Active Forward Sweep
ONX-CATV-REV-SWEEP Active Reverse Sweep
NSC-SFP-GPON GPON SFP for GPON emulation
NSC-SFP-XGSPON XGSPON SFP+ for XGSPON emulation
NSC-SFP-850-1G-10G Optical Ethernet SFP + 850 nm SR 1G and 10G
NSC-SFP-1310-1G-10G Optical Ethernet SFP + 1310 nm LR 1G and 10G
NSC-SFP-1550-1G-10G Optical Ethernet SFP + 1550 nm ER 1G and 10G
AC-CHARGER Replacement AC charger (no power cord)
AC-CAR-CHARGER Car Charger
CC-034601 Large Carrying Case
1019-00-1366 Strand Hook
ONXF-HANDSTRAP Handstrap for use on unit without a case
ONXF-HFC-BATT-96WHR Replacement 96 W/Hr Battery
ONXF-DISPLAY-PROTECTOR-5P Replacement screen protector (5 pack)
ONXF-ETH-ADAPT-M-F Ethernet Cat6a M-F adapter 0.5 m
NSC-ETHERNET-CABLE Ethernet Cat6a M-M Patch Cable
ONXF-HFC-CASE Fitted protective case for ONX-720/730 with DOCSIS 3.1

Documents & Resources

OneExpert HFC (ONX-720/730)
datasheet · PDF
OneExpert HFC (ONX-720/730)
brochure · PDF
OneExpert HFC (ONX-720/730) Quick Start Guide
manual · PDF
OneExpert HFC ONX-720/730 User Guide
manual · PDF
OneExpert HFC 720/730 Software
software
ONX-XXX Ethernet Profiles
manual · PDF