VIAVI MAP mOSX-C1 MOSX-C1116XCCB0-M100-MSC 16-Port SC/PC Common Connection Optical Matrix Switch
16-port any-to-any single-mode optical matrix switch module for the VIAVI MAP Series with SC/PC bulkhead connectors, in a dual-slot format.
- Number of ports
- 16 ports
- Connector type
- SC/PC bulkhead
- Slot width
- Dual Slot
- Connection type
- Any port to any port
Overview
The MOSX-C1116XCCB0-M100-MSC is the 16-port, SC/PC bulkhead version of the VIAVI MAP Series mOSX-C1 cross connect optical switch. It is a non-blocking, bidirectional matrix switch module for single-mode fiber, occupying a dual slot in a MAP chassis and compatible with all current MAP-300 and MAP-200 chassis.
The switch fabric supports any-port to any-port connections, so the same hardware can be configured in software as symmetric (for example 8x8) or asymmetric (for example 4x12) topologies. A 16-port switch can be set up as a dual 4x4, 8x8, 7x9, 6x10 or 1x15. Ports can be allocated as inputs or outputs as needed, connections can be pre-configured without light present, and connections can be made and broken without affecting any other connection.
Switching principle
The switching engine uses compact piezoelectric actuators to align the signal path with expanded beam optics. A capacitive sensor matrix measures the position of the collimating lens to provide long-term stability and repeatability, and connections are maintained even when no light is present. Reflective optics fold the switch engine so that each fiber can connect to all other fibers.
Control and integration
The module is controlled through the MAP Series graphical user interface or a SCPI remote interface. Ports can be given logical names, connections between ports can be disabled or re-enabled, and an optional software setting can restrict the switch to a programmed MxN topology. Paired with VIAVI mOSW modules, the mOSX can be used to build larger switching systems.
Key Features
- Non-blocking, bidirectional matrix switch
- Any port to any port connection fabric
- 16 ports with SC/PC bulkhead connectors
- Wide wavelength range, 1250 to 1675 nm
- 1.0 dB typical insertion loss
- 25ms switching speed
- Flexible SCPI remote interface or MAP Series Graphical User Interface (GUI)
- Connections between ports can be disabled or re-enabled
- Connections can be pre-configured without light present
- Logical port naming in the GUI
- Optional software-enforced MxN topology mode
- Compatible with all current MAP-300 and MAP-200 chassis
Specifications
| Number of ports | 16 ports |
|---|---|
| Connector type | SC/PC bulkhead |
| Slot width | Dual Slot |
| Connection type | Any port to any port |
| Fiber type |
Single Mode
For IEC 60793-2-50 Type B1.3/ ISO 11801 OS2 compliant fiber, i.e. Corning SMF-28e
|
| Chassis compatibility | All current MAP-300 and MAP-200 chassis |
| Operating wavelength range |
1260 nm to 1675 nm
Datasheet specification table; the page and datasheet feature list state 1250 to 1675 nm
|
|---|---|
| Insertion loss (IL), active connection maximum |
≤ 1.5 dB
Including one pair of connectors; tested at 1550 nm. 16 or 32 ports
|
| Insertion loss, typical |
< 1.0 dB
Typical
|
| Insertion loss, open port | > 55 dB |
| Insertion loss, inactive connection | > 55 dB |
| Return loss (RL) |
> 50 dB
Tested with APC connectors at 1550 nm
|
| Polarization dependent loss (PDL) |
< 0.1 dB
For wavelength range of 1530 nm – 1675 nm. Tested at 1550 nm.
|
| Repeatability (maximum) |
± 0.05 dB
Measured between two consecutive readings over 100 cycles. 16 or 32 ports
|
| IL stability |
± 0.05 dB
Any channel drift relative to reference channel at constant temperature over 15 mins period. 16 or 32 ports
|
| Wavelength dependent loss (WDL) |
≤ 0.3 dB
For wavelength range of 1530 nm – 167 nm (as printed)
|
| Temperature dependent loss (TDL) |
≤ 0.2 dB
Over the temperature range 15 to 35°C at 1550 nm after thermal stabilization. 16 or 32 ports
|
| Crosstalk (maximum) |
- 55 dB
16 or 32 ports
|
| Max input power (optical) | 500 mW (27 dBm) |
| Switching time |
≤ 25 ms
To full specification
|
| Dark fiber switching | Yes |
| Bi-direction optics | Yes |
| Lifetime | > 10^9 Cycles |
| Warming up time | 60 min |
|---|---|
| Operation temperature | 10°C to 40°C |
| Operation humidity | < 85% RH non-condensing |
| Storage temperature | -40°C to +70°C, <40% RH non-condensing |
| Safety | When installed in a MAP chassis, MAP optical switches comply with CE, CSA/UL/IEC61010-1, and LXI Class C requirements |
| Dimensions (W x H x D) |
Dual slot: 8.1 x 13.26 x 37.03 cm (3.2 x 5.2 x 5.7 in)
Imperial depth as printed in the datasheet
|
|---|---|
| Weight | Dual slot: 3.1 kg (6.8 lb) |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Test system automation for multi-port components, modules and line cards
- Manage complex manufacturing test sequencing
- Parallel test architectures with multiple independent DUTs
- Larger switching systems combined with MAP-Series mOSW modules
- Coherent optical module testing
Options & Accessories
| Option | Description |
|---|---|
| AC500 | FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC501 | FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC502 | FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve |
| AC503 | FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve |
| CleanBlast | CleanBlast fiber end-face cleaning system — Optional inspection and cleaning tool for removing dirt and debris from connectors; available in a benchtop and portable version |
| FiberChek | FiberChek probe microscope — Optional one-button, fully autonomous handheld fiber inspection probe |
| P5000i | P5000i fiber microscope — Optional automated fiber inspection and analysis probe with PASS/FAIL capability for PCs, laptops, mobile devices and VIAVI test solutions |
