MAP mOSX-C1 MOSX-C1116XCCB0-M100-MFP 16-Port FC/PC Optical Matrix Switch Module
16-port common connection single-mode optical matrix switch module with FC/PC bulkheads for VIAVI MAP-Series chassis.
- Number of ports
- 16 ports
- Connector type
- FC/PC bulkhead
- Slot width
- Dual Slot
- Connection Type
- Any port to any port
Overview
The MOSX-C1116XCCB0-M100-MFP is the 16-port, FC/PC-bulkhead variant of the VIAVI MAP Series mOSX-C1 cross connect optical switch. It is a dual-slot module that installs in MAP-300 and MAP-200 chassis and acts as a test path manager, connecting multiple test paths across the switch fabric to enable parallel test processes.
The mOSX is a low insertion loss, non-blocking, bidirectional matrix switch. Its any-port to any-port connection fabric supports both symmetric topologies (for example 8x8) and asymmetric topologies (for example 4x12), so the same hardware can be reconfigured on demand. A 16-port switch can be configured as a dual 4x4, 8x8, 7x9, 6x10 or 1x15. Connections may be pre-configured without light present, are held in a blocking state until activated, and can be made and broken without affecting other connections.
Measurement principle
The switching engine uses compact piezoelectric actuators to align the signal path with expanded beam optics. A capacitive sensor matrix measures the position of the collimating lens to provide long-term stability and repeatability, and connections are maintained even when no light is present. Reflective optics fold the switch engine so that each fiber can connect to all other fibers.
Software and control
The module is controlled through the MAP Series graphical user interface or a SCPI remote interface. Ports can be given logical names, and an optional MxN topology can be assigned in software so that only connections following the programmed structure are allowed. In full any-to-any mode all connections are possible. The mOSX can be paired with MAP-Series mOSW modules to build larger switching systems.
Key Features
- Non-blocking, bidirectional matrix switch
- Any port to any port connection fabric
- Symmetric and asymmetric switch topologies configurable in software
- Wide wavelength range, 1250 to 1675 nm
- 1.0 dB typical insertion loss
- 25ms switching speed
- Flexible SCPI remote interface or MAP Series Graphical User Interface (GUI)
- Connections between ports can be disabled or re-enabled
- Connections can be pre-configured without light present
- 16 FC/PC bulkhead ports in a dual-slot module
Specifications
| Number of ports | 16 ports |
|---|---|
| Connector type | FC/PC bulkhead |
| Slot width | Dual Slot |
| Connection Type | Any port to any port |
| Fiber Type |
Single Mode
For IEC 60793-2-50 Type B1.3/ ISO 11801 OS2 compliant fiber, i.e. Corning SMF-28e
|
| Chassis compatibility | All current MAP-300 and MAP-200 chassis |
| Operating Wavelength Range |
1260 nm to 1675 nm
Web page and datasheet feature list state 1250 to 1675 nm; datasheet specification table states 1260 nm to 1675 nm
|
|---|---|
| Insertion Loss (IL), Active Connection Maximum |
≤ 1.5 dB
Including one pair of connectors; tested at 1550 nm
|
| Insertion Loss, typical |
< 1.0 dB
Typical
|
| Insertion Loss, Open Port | > 55 dB |
| Insertion Loss, Inactive Connection | > 55 dB |
| Return Loss (RL) |
> 50 dB
Tested with APC connectors at 1550 nm
|
| Polarization Dependent Loss (PDL) |
< 0.1 dB
For wavelength range of 1530 nm – 1675 nm. Tested at 1550 nm.
|
| Repeatability (maximum) |
± 0.05 dB
Measured between two consecutive readings over 100 cycles
|
| IL stability |
± 0.05 dB
Any channel drift relative to reference channel at constant temperature over 15 mins period
|
| Wavelength Dependent Loss (WDL) |
≤ 0.3 dB
For wavelength range of 1530 nm – 167 nm (as printed)
|
| Temperature Dependent Loss (TDL) |
≤ 0.2 dB
Over the temperature range 15 to 35°C at 1550 nm after thermal stabilization
|
| Crosstalk (maximum) | - 55 dB |
| Max input power (optical) | 500 mW (27 dBm) |
| Switching time |
≤ 25 ms
To full specification
|
|---|---|
| Dark Fiber Switching | Yes |
| Bi-Direction Optics | Yes |
| Lifetime | > 10^9 Cycles |
| Warming up Time | 60 min |
|---|---|
| Operation temperature | 10°C to 40°C |
| Operation humidity | < 85% RH non-condensing |
| Storage temperature | -40°C to +70°C, <40% RH non-condensing |
| Dimensions (W x H x D) |
8.1 x 13.26 x 37.03 cm (3.2 x 5.2 x 5.7 in)
Dual slot; inch depth as printed in the datasheet
|
|---|---|
| Weight |
3.1 kg (6.8 lb)
Dual slot
|
| Compliance |
CE, CSA/UL/IEC61010-1, and LXI Class C
When installed in a MAP chassis
|
|---|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Test system automation for multi-port components, modules and line cards
- Complex manufacturing test sequencing
- Larger switching systems combined with MAP-Series mOSW modules
- Parallel test architectures
Options & Accessories
| Option | Description |
|---|---|
| AC500 | FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC501 | FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC502 | FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve |
| AC503 | FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve |
