VIAVI MAP mOSX-C1 MOSX-C1116XCCB0-M100-MFA 16-Port Common Connection Optical Matrix Switch, FC/APC
16-port any-to-any single-mode optical matrix switch module for MAP chassis with FC/APC bulkhead connectors, in a dual-slot format.
- Matrix size
- 16 ports
- Connector type
- FC/APC bulkhead
- Slot width
- Dual Slot
- Connection type
- Any port to any port
Overview
The VIAVI MOSX-C1116XCCB0-M100-MFA is the 16-port, FC/APC bulkhead version of the mOSX-C1 cross connect optical switch for the MAP Series. It is a dual-slot module and is compatible with all current MAP-300 and MAP-200 chassis. The mOSX-C1 serves as a test path manager: connecting multiple test paths across the switch fabric allows parallel test processes in development and manufacturing.
The switch is non-blocking and bidirectional, with a maximum insertion loss of 1.5 dB for the 16-port configuration and switching time of 25 ms or less. Its fabric supports any-port to any-port connections, so the same hardware can be configured in software as symmetric or asymmetric topologies; a 16-port switch can be set up as a dual 4x4, 8x8, 7x9, 6x10 or 1x15. Ports can be allocated as inputs or outputs as needed, connections can be pre-configured without light present, and connections can be made and broken without affecting other connections.
Switching principle
The switching engine uses compact piezoelectric actuators to align the signal path through expanded beam optics. A capacitive sensor matrix measures the position of the collimating lens for long-term stability and repeatability, and connections are maintained even when no light is present. Reflective optics fold the switch engine so that each fiber can connect to all other fibers.
Control
The module is controlled through the MAP Series graphical user interface or a SCPI remote interface. Ports can be given logical names, connections between ports can be disabled or re-enabled, and an optional MxN topology can be assigned so that only connections following the programmed structure are allowed. The mOSX can be paired with VIAVI mOSW modules to build larger switching systems.
Key Features
- Non-blocking, bidirectional matrix switch
- 16 ports with any-port to any-port connection
- FC/APC bulkhead connectors
- Wide wavelength range, 1250 to 1675 nm
- 1.0 dB typical insertion loss
- 25ms switching speed
- Flexible SCPI remote interface or MAP Series Graphical User Interface (GUI)
- Connections between ports can be disabled or re-enabled
- Connections can be pre-configured without light present
- Supports symmetric and asymmetric topologies configured by software
- Compatible with all current MAP-300 and MAP-200 chassis
Specifications
| Matrix size | 16 ports |
|---|---|
| Connector type | FC/APC bulkhead |
| Slot width | Dual Slot |
| Connection type | Any port to any port |
| Fiber type |
Single Mode
For IEC 60793-2-50 Type B1.3/ ISO 11801 OS2 compliant fiber, i.e. Corning SMF-28e
|
| Dark fiber switching | Yes |
| Bi-direction optics | Yes |
| Operating wavelength range |
1260 nm to 1675 nm
Datasheet specification table; the page and datasheet feature list state 1250 to 1675 nm
|
|---|---|
| Insertion loss (IL), active connection maximum |
≤ 1.5 dB
Including one pair of connectors; tested at 1550 nm. 16 or 32 port value
|
| Insertion loss, typical |
< 1.0 dB
Functional description
|
| Insertion loss, open port | > 55 dB |
| Insertion loss, inactive connection | > 55 dB |
| Return loss (RL) |
> 50 dB
Tested with APC connectors at 1550 nm
|
| Polarization dependent loss (PDL) |
< 0.1 dB
For wavelength range of 1530 nm – 1675 nm. Tested at 1550 nm
|
| Repeatability (maximum) |
± 0.05 dB
Measured between two consecutive readings over 100 cycles. 16 or 32 port value
|
| IL stability |
± 0.05 dB
Any channel drift relative to reference channel at constant temperature over 15 mins period. 16 or 32 port value
|
| Wavelength dependent loss (WDL) |
≤ 0.3 dB
For wavelength range of 1530 nm – 167 nm (as printed)
|
| Temperature dependent loss (TDL) |
≤ 0.2 dB
Over the temperature range 15 to 35°C at 1550 nm after thermal stabilization. 16 or 32 port value
|
| Crosstalk (maximum) |
- 55 dB
16 or 32 port value
|
| Max input power (optical) | 500 mW (27 dBm) |
| Switching time | ≤ 25 ms |
|---|---|
| Lifetime | > 10^9 Cycles |
| Warming up time | 60 min |
| Operation temperature | 10°C to 40°C |
|---|---|
| Operation humidity | < 85% RH non-condensing |
| Storage temperature | -40°C to +70°C, <40% RH non-condensing |
| Dimensions (W x H x D) |
8.1 x 13.26 x 37.03 cm (3.2 x 5.2 x 5.7 in)
Dual slot; inch values as printed by the manufacturer
|
|---|---|
| Weight |
3.1 kg (6.8 lb)
Dual slot
|
| Safety |
CE, CSA/UL/IEC61010-1, and LXI Class C
When installed in a MAP chassis
|
|---|---|
| Chassis compatibility | All current MAP-300 and MAP-200 chassis |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Test system automation for multi-port components, modules and line cards
- Complex manufacturing test sequencing
- Larger switching systems paired with MAP-Series mOSW modules
- Parallel test architectures
- Optical device and sub-system manufacturing test
Options & Accessories
| Option | Description |
|---|---|
| AC502 | FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve |
| AC503 | FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve |
