VIAVI mORL-A1 MORL-A13500-BID-M100-MFA Single-Mode 1310/1550 nm Bidirectional IL/RL Meter Module for MAP-Series

Single-mode 1310/1550 nm bidirectional FC/APC insertion loss and return loss meter module for the VIAVI MAP-Series PCT system.

Wavelengths (2-Wavelength Version): 1310, 1550 nm
Fiber Type: Single-Mode 9 µm core
Configuration: IL/RL Meter 1310/1550nm SMF Bidirectional FC/APC

Datasheet

Overview

The MORL-A13500-BID-M100-MFA is the bidirectional version of the 2-wavelength single-mode mORL-A1 IL/RL meter. It has 1310 nm and 1550 nm sources and an FC/APC interface, and it installs in a VIAVI MAP-Series chassis as the measurement engine of the Passive Component/Connector Test (PCT) solution. PCT tests insertion loss, return loss, physical length and polarity of optical connectors, cable assemblies, structured-cabling products and splitters.

Measurement principle

IL uses the power meter method, with launch power monitoring and depolarization technology that give 0.001 dB resolution. RL uses time-domain (mandrel-free) technology based on OTDR methods. This removes manual terminations, measures DUT length, and runs in parallel with IL from the same optical stimulus. The single-mode mORL-A1 delivers 80 dB of RL dynamic range and can measure jumpers as short as 70 cm.

Bidirectional testing

The bidirectional (BID) configuration adds an internal 2x2 switch to the module. Combined with time-domain RL and the multiple programmable window function, it measures RL on both connectors of a jumper with one connection, so the jumper does not have to be measured again in the other direction.

Software and system integration

The module runs under the PCT super-application (PCT Max or PCT Lite) on the MAP chassis. The software offers instrument mode, script (DUT-aware) mode with a database, and port mapping, plus a full SCPI command set over LAN or GPIB. The module can be combined with mOSW-C1 optical switches, mOPM remote power heads and the mOPM-C1RHPM Remote Head Polarity Mapper. PCT is compatible with current MAP-300 and MAP-200 chassis except the MAP-220.

Key Features

Single-mode IL/RL meter with 1310 nm and 1550 nm sources
Bidirectional configuration with internal 2x2 switch
FC/APC connector interface
Time-domain (mandrel-free) RL measurement with length measurement
80 dB of RL dynamic range
IL display resolution of 0.001 dB
Small footprint - 25% of competing solutions
Integrated automation via SCPI and no-code scripting
Database interface and report generation
MPO and MTP capable with simultaneous polarity measurement
Growth enabling - 1 to 1,000+ DUT channels
FastIL prescreening at 0.2 s per channel
Complies with CE, CSA/UL/IEC61010-1 and LXI Class C requirements when installed in a MAP Series chassis

Specifications

Source

Wavelengths (2-Wavelength Version)	1310, 1550 nm
Fiber Type	Single-Mode 9 µm core
Configuration	IL/RL Meter 1310/1550nm SMF Bidirectional FC/APC

Measurement Time

Initializing Time	< 4s
Averaging Options Per Wavelength	0.5, 1, 2, 5, 10s The MAP-Based IL/RL Testing Solution data sheet lists 2, 5, 10s
Total Time (IL, RL, Polarity) for 2 wavelengths	23s (12 channels), 44s (24 channels) With mOPM-C1RHPM Remote Head Polarity Mapper
Prescreening with FastIL	0.2s per channel With mOPM-C1RHPM; requires MAP-300 FW 13.0+ with PCT

Insertion Loss

Display Resolution	0.001 dB
Total IL Uncertainty	± 0.02 dB After valid zero loss, total expanded uncertainty (2σ), reconnecting the same connector and OPM adaptor, temperature ±1°C, using internal source; IL uncertainty from launching condition not included
Additional Uncertainties Due to 1xN Switching	± 0.01 dB If mOSW-C1 added
Additional Uncertainties Due to Fiber Position in the Integrating Sphere	± 0.03 dB 24-channel ribbon fiber

Return Loss

Display Resolution	0.01 dB
RL Dynamic Range	80 dB
DUT Length, DUT reflections (both ends) < 40 dB	> 170 cm
DUT Length, DUT reflections (both ends) > 40 dB	> 70 cm
Return Loss Repeatability	30 to 65 dB ± 0.1 dB; 65 to 70 dB ± 0.2 dB; 70 to 75 dB ± 0.4 dB; 75 to 80 dB ± 1.5 dB At 5 s averaging time and 200 m range; 10 measurements with a stable connection of a 3 m patch cord
Return Loss Accuracy	30 to 70 dB ± 1.0 dB; 70 to 75 dB ± 1.7 dB; 75 to 80 dB ± 3.0 dB At 5 s averaging time and 200 m range
Recalibration Period	1 year

Environmental

Warm-up Time	20 min
Operating Temperature, Humidity	25 ± 5°C non-condensing humidity
Storage Temperature	- 30 to + 60°C

Physical

Size (W x H x D)	4.06 x 13.26 x 37.03 cm (1.6 x 5.22 x 14.58 in)
Weight (Approximately)	1.2 kg (2.65 lb)

Compliance

Safety and Interface	CE, CSA/UL/IEC61010-1, and LXI Class C requirements MAP mORL-A1 modules installed in a MAP Series chassis

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

IL, RL and length testing of optical connectors and cable assemblies
Structured-cabling solutions and optical splitter testing
Automated testing of multifiber assemblies such as MPO
Verifying continuity and polarity of large multifiber assemblies
Measuring RL of line cards and receptacle-based transponders
R&D, production and qualification test environments

Options & Accessories

Option	Description
MOSW-C111C004B0-MXXX-MYY	Single 1 x 4 switch, bulkheads — XXX = fiber type code (M100 9 µm Single Mode), YY = connector type code (MFA FC/APC)
MOSW-C111C008B0-MXXX-MYY	Single 1 x 8 switch, bulkheads
MOSW-C111C012B0-MXXX-MYY	Single 1 x 12 switch, bulkheads (Dual width module)
MOSW-C111C024B0-MXXX-MYY	Single 1 x 24 switch, bulkheads (Dual width module)
MOPM-C1RH1	Single channel remote interface cassette
MOPM-C1RH2	Dual channel remote interface cassette
MOPM-C1RH4	Quad channel remote interface cassette
MOPM-C1RHPCT	2mm InGaAs PCT system remote head
MOPM-C1RHIP	Integrated PCT system remote head
MOPM-C1RHPM	Remote Head Polarity Mapper — Simultaneous IL/RL/Polarity remote head; requires MOPM-C1RH1 base cassette, PCTmax and MAP-300 Release 13.0 or later
MSUP-300A-FIT	MAP-300 fiber connector inspection app — Requires probe
MSUP-300A-PCTMAPPING	MAP-300 PCT polarity and port mapping application add-on
MSUP-300A-PCTREMDB	MAP-300 PCT remote centralized database connection key
MSUP-300A-SBSC	MAP-300 PCT driver for legacy SB/SC series switches
MSUP-300A-PCT-TDR	MAP-300 Enhanced PCT TDR License
MSUP-300A-PCTCASCADE	MAP-300 PCT Switch Cascade
MSUP-300A-PCTLOGGING	MAP-300 PCT Continuous Mode Logging License
MSUP-300A-SEIL	MAP-300 Single Ended Insertion Loss license
MSUP-FIT	MAP-200 Super Application Fiber Inspection (FIT)
MSUP-PCTMAPPING	MAP-200 Super Application PCT Mapping
MSUP-PCTREMDB	MAP-200 CT Remote Database Connection Key
MSUP-SBSC	MAP-200 driver for legacy SB/SC series switches
AC500	FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve
AC501	FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve
AC502	FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve
AC503	FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve