RA09MB-O
Radio Analysis Module RA09MB-O 9 kHz to 9 GHz Spectrum Analyzer for OneAdvisor 800
9 kHz to 9 GHz radio analysis module for the VIAVI OneAdvisor 800 with real-time spectrum analysis and 100GE pluggable optics hardware.
- Frequency reference accuracy
- ±0.05 ppm (0°C to 50°C or 32°F to 122°F) + aging
- Frequency reference accuracy with GPS
- ±10 ppb (GPS lock); ±20 ppb (Hold over, 72 hours)
- Frequency reference aging
- ±0.5 ppm/year, ±25 ppb with GPS
- Frequency readout accuracy (start, stop, center, marker)
- ± (readout frequency x frequency reference accuracy + RBW center + 0.5 x horizontal resolution + 2 Hz)
Overview
The VIAVI Radio Analysis Modules (RAxxMB) are a family of radio analysis modules for the OneAdvisor 800 wireless field test platform. Each module performs RF spectrum and interference analysis, records in-phase (I) and quadrature (Q) components of RF signals for detailed signal profiling, and assesses RF signal quality and coverage. The family consists of four models with upper frequency limits of 9 GHz, 18.5 GHz, 32 GHz and 44 GHz; all models start at 9 kHz and include pluggable-optics hardware for Ethernet testing up to 100GE.
The spectrum analyzer provides swept and real-time measurement modes. With the RA-RTSA-100 option, real-time persistent spectrum analysis covers up to 110 MHz of instantaneous bandwidth, and the RA-IQ-CAP option records digital IQ data at configurable bandwidths. Gated sweep and TDD Auto Gated Spectrum (TAGS) options allow interference analysis on LTE-TDD and 5G NR networks, and an interference analysis option adds spectrogram and RSSI logging, interference finder and radar chart views.
Cellular and transport test options
Software options add LTE/LTE-A FDD and TDD, DSS and 5G NR signal analysis and over-the-air (OTA) analysis, a DSS/LTE/NR blind scanner, 5G NR cell phase synchronization, 5G RAN analysis, 5G NR test-model measurements for Releases 15 and 16, NSA OTA analysis, channel scanning and EMF analysis. The module also includes an internal RF power meter and supports external VIAVI directional and terminating power sensors.
The Ethernet test interfaces support 10M/100M/1000M electrical LAN and 10, 25, 40, 50 and 100 GigE LAN through SFP/SFP+/SFP28 and QSFP ports, with RFC 2544, Y.1564, QuickCheck, optics self-test, cable test and 5G NR discovery workflows. GNSS connectivity, Bluetooth and Wi-Fi are available as options.
Key Features
- Frequency coverage from 10MHz to 9, 18, 32, or 44 GHz
- Real-time persistent spectrum analysis with up to 110 MHz of instantaneous bandwidth
- 4G-LTE and 5G-NR compliance, including blind-scanner, coverage, and synchronization assessment
- Ethernet verification for 1G, 10G, 25G, and 100G
- Recording of in-phase (I) and quadrature (Q) components of RF signals for detailed signal analysis
- RF spectrum and interference analysis on the OneAdvisor 800 wireless platform
- Resolution bandwidth 1 Hz to 10 MHz in a 1-3-10 sequence
- Internal RF power meter with -100 to +100 dBm display range
- Gated sweep and TDD Auto Gated Spectrum (TAGS) options for LTE-TDD and 5G NR
- RFoCPRI interference analysis option for CPRI line rates 2 to 8
- Optional built-in GNSS receiver with ±10 ppb frequency accuracy when locked
- Dual SFP/QSFP ports for Ethernet test interfaces
- Operates from the OneAdvisor 800 14.4 V, 6800 mAh lithium-ion battery with optional power expansion modules
- Recommended calibration cycle of 1 year
Specifications
Frequency
| Frequency reference accuracy | ±0.05 ppm (0°C to 50°C or 32°F to 122°F) + aging |
|---|---|
| Frequency reference accuracy with GPS | ±10 ppb (GPS lock); ±20 ppb (Hold over, 72 hours) |
| Frequency reference aging | ±0.5 ppm/year, ±25 ppb with GPS |
| Frequency readout accuracy (start, stop, center, marker) |
± (readout frequency x frequency reference accuracy + RBW center + 0.5 x horizontal resolution + 2 Hz)
Horizontal resolution = frequency span/trace #; RBW center = 15% x RBW
|
| Frequency span range | 0 Hz (zero span); 9 kHz to max frequency of each module (9, 18.5, 32, 44 GHz) |
| Frequency span resolution | 1 Hz |
| Frequency span accuracy | ± (2 x RBW centering + horizontal resolution) |
| Frequency range | 9 kHz to 9 GHz |
Sweep and Bandwidth
| Trace update |
25 traces/sec
Nominal; Span = 260 MHz, RBW = 100 kHz
|
|---|---|
| Sweep time range |
0.4 ms to 1000 sec; 24 μs to 200 sec (zero span)
Nominal
|
| Sweep time accuracy |
±2%
Zero span
|
| Sweep type | Continuous, Single |
| Sweep points | 501, 1001, 1501, 2001, 3001, 5001, 10001 |
| Sweep mode | Gated sweep (requires option RA-GNSS), Normal, Fast |
| Trigger source | Free run, video, external |
| Trigger delay | Range: 0 to 200 sec, Resolution: 6 μs |
| Resolution bandwidth (RBW) range |
1 Hz to 10 MHz (1-3-10 sequence)
-3 dB bandwidth; nominal
|
| Resolution bandwidth (RBW) accuracy |
±10%
Nominal
|
| Video bandwidth (VBW) range |
1 Hz to 10 MHz (1-3-10 sequence)
-3 dB bandwidth; nominal
|
| Video bandwidth (VBW) accuracy |
±10%
Nominal
|
Amplitude
| Measurement range (9 kHz to 18.5 GHz) | DANL to +25 dBm |
|---|---|
| Input attenuator range (9 kHz to 18.5 GHz) | 0 to 55 dB in 5 dB steps |
| Preamplifier gain | 20 dB |
| Maximum RF input level (9 kHz to 18.5 GHz) |
+25 dBm, ±50 VDC
Average CW power
|
| Log/linear scale | 10 divisions; 1 to 20 dB/division in 1 dB |
| Scale units | dBm, dBV, dBmV, dBμV, V, mV, W, mW |
| Reference level range | -150 to +100 dBm |
| Reference level resolution | Log scale: 0.1 dB; Linear scale: 1 % of reference level |
| Absolute amplitude accuracy, 20° to 30°C, 250 kHz to 18.5 GHz |
±1.0 dB, ± 0.5 dB (T)
Preamplifier OFF: input signal ≥ -50 dBm; Preamplifier ON: -90 dBm < input signal < -50 dBm; auto-coupled, 15-minute warm-up
|
| Absolute amplitude accuracy, -10° to 55°C, 250 kHz to 12 GHz |
±1.5 dB, ± 1.0 dB (T)
Preamplifier OFF: input signal ≥ -50 dBm; Preamplifier ON: -90 dBm < input signal < -50 dBm; auto-coupled, 15-minute warm-up
|
| Input VSWR, 10 MHz to 18.5 GHz |
1.5:1
@ 10 dB Attenuation with Normal mode
|
| Preamplifier frequency range | 10 MHz to 9 GHz |
Display Average Noise Level (DANL)
| High Linear Mode (Preamplifier Off), 10 MHz to 7 GHz |
-134 dBm, -139 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
|---|---|
| High Linear Mode (Preamplifier Off), > 7 GHz to 14.7 GHz |
-130 dBm, -135 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Normal Mode (Preamplifier Off), 10 MHz to 7 GHz |
-137 dBm, -141 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Normal Mode (Preamplifier Off), > 7 GHz to 14.7 GHz |
-134 dBm, -138 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Preamplifier On (Preamp 1), 10 MHz to 7 GHz |
-158 dBm, -161 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Preamplifier On (Preamp 1), > 7 GHz to 14.7 GHz |
-155 dBm, -158 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Preamplifier On (Preamp 1 and 2), 10 MHz to 7 GHz |
-163 dBm, -166 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
| Preamplifier On (Preamp 1 and 2), > 7 GHz to 14.8 GHz |
-160 dBm, -163 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
Dynamic Range
| Second harmonic distortion, 10 MHz to 9.25 GHz |
< -75 dBc, typical
Input -30 dBm, peak detector, high linearity mode
|
|---|---|
| Third-order intercept (TOI), 10 MHz to 8 GHz |
+16 dBm, typical
High Linearity Mode
|
| Third-order intercept (TOI), > 8 GHz to 18.5 GHz |
+20 dBm, typical
High Linearity Mode
|
| Spur free dynamic range |
> 105 dB, 107 dB (T) @ 2 GHz
2/3 (TOI-DANL) in 1 Hz RBW
|
| Inherent residual response, 9 kHz to 6 GHz (sweep tuned) |
-95 dBm; Exceptions: -90 dBm @ 244.378 MHz
Typical; input terminated, 0 dB attenuation, Preamp off; 10 kHz RBW, 1 kHz VBW, RMS detector, Normal Mode. Notice spurs: -80 dBm @ 27.785 MHz, 38.375 MHz, 127.68 MHz, 1795.34 MHz, 2909 MHz
|
| Inherent residual response, 9 kHz to 6 GHz (real time) |
-75 dBm; Exceptions: -70 dBm @ 5386 MHz
Typical; input terminated, 0 dB attenuation, Preamp off; RBW: 30 kHz, VBW: 30 kHz, Peak detector, Span = 100 MHz, Normal Mode
|
| Inherent residual response, > 6 GHz to 18.5 GHz |
Sweep tune: -85 dBm; Real time: -70 dBm
Typical; Notice spurs: -90 dBm @ 6.163 GHz, 10.665 GHz, 12.50 GHz, 14.220 GHz
|
| Input-related spurious, 9 kHz to 18.5 GHz |
Sweep tune: -70 dBc
Typical; -25 dBm input signal; 0 dB attenuation, Preamp off; Peak detector, Span < 1 GHz, 1 kHz RBW, 100 Hz VBW, Normal Mode, carrier offset > 5 MHz
|
| LO feedthrough to input, 9 kHz to 18.5 GHz | <-80 dBm |
| SSB phase noise @ 10 kHz offset |
-102 dBc/Hz, -105 dBc/Hz (T)
@ 1 GHz, input level -18 dBm, RMS detector, Normal Mode
|
| SSB phase noise @ 100 kHz offset |
-106 dBc/Hz, -109 dBc/Hz (T)
@ 1 GHz, input level -18 dBm, RMS detector, Normal Mode
|
| SSB phase noise @ 1 MHz offset |
-117 dBc/Hz, -120 dBc/Hz (T)
@ 1 GHz, input level -18 dBm, RMS detector, Normal Mode
|
Trace and Marker
| Trace detectors | Normal, positive peak, negative peak, sample, average (RMS) |
|---|---|
| Number of traces | 6 |
| Trace states | Clear/write, maximum hold, minimum hold, capture, load, blank, trace math, trace info |
| Trace functions | Time expired maximum hold and minimum hold, trace math, trace info |
| Marker type | Normal, delta, delta pair, marker table |
| Number of markers | 6 |
| Marker functions | Noise marker, frequency count |
| Marker to | Peak, next peak, next peak right, next peak left, min search, always peak; Center, start, stop |
| Audio beep | Tone variation based on signal strength |
Measurements
| Channel power | Channel power, Spectral Density, PAR (Peak to Average Ratio) |
|---|---|
| Occupied bandwidth | Occupied bandwidth, Integrated power, Occupied power, x dB bandwidth |
| Spectrum emission mask | Reference power, Peak level at defined range |
| Adjacent channel power (ACP) | Reference power, Absolute power at defined frequency offset, Relative power at defined frequency offset |
| Multi-ACP | Reference power at lowest defined frequency, Reference power at highest defined frequency, Absolute power at defined frequency offset, Relative power at defined frequency offset |
| Spurious emissions | Peak power at defined range, Frequency of peak power at defined range |
| Total harmonic distortion | Power level at each harmonic, % of THD |
| Field strength | Field strength power at markers |
| AM/FM audio demodulation | CW, AM, FM with configurable dwell time |
| Route map | RSSI, ACP |
Internal RF Power Meter
| Display range | -100 to +100 dBm |
|---|---|
| Offset range | 0 to 60 dB |
| Resolution | 0.01 dB or 0.1 x W (x = m, μ, p) |
| Span | 1 kHz to max frequency of each option |
| Dynamic range (10 MHz to 18.5 GHz) | -100 to +25 dBm |
| Accuracy | Same as spectrum analyzer |
| Frequency range | 10 MHz to 9 GHz |
External RF Power Sensors
| Display range |
-100 to +100 dBm
Requires external RF power sensor
|
|---|---|
| Offset range | 0 to 60 dB |
| Directional sensor frequency range | JD731B: 300 MHz to 3.8 GHz; JD733A: 150 MHz to 3.5 GHz |
| Directional sensor dynamic range | JD731B: Average 0.15 to 150 W, Peak 4 to 400 W; JD733A: Average 0.1 to 50 W, Peak 0.1 to 50 W |
| Directional sensor measurement type | Forward/Reverse average power, Forward peak power, VSWR |
| Directional sensor accuracy |
Forward Power ±(4% of reading + 0.05 W)
CW condition at 15 to 35°C (59 to 95°F)
|
| Terminating sensor measurement type | JD732B: Average; JD734B: Peak; JD736B: Average and Peak |
| Terminating sensor frequency range | 20 MHz to 3.8 GHz |
| Terminating sensor dynamic range | -30 to + 20 dBm |
| Terminating sensor accuracy | ±7% |
Connectivity Options
| Bluetooth (Option ONA-MF-BT) mode |
Personal area network (PAN), File transfer profile (FTP)
Built-in type
|
|---|---|
| WiFi (Option ONA-MF-WIFI) interface standard |
IEEE 802.11 b/g/n
Built-in type; Infrastructure mode; IPv4, IPv6
|
| GNSS (Option RA-GNSS) receiver type | Built-in type |
| GNSS information | Latitude, Longitude, Satellite, Status, GNSS System, Sky Plot, Signal Strength |
| High-frequency accuracy, GNSS lock | ±10 ppb |
| High-frequency accuracy, hold over for 3 days |
±20 ppb (0 to 50°C)
15 minutes after satellite locked
|
| GNSS connector |
SMA, female
Optional antenna: SMA (m), 3.3 VDC or 5 VDC; JD71050351 Single Band GNSS Antenna, G700050391 Mag Mount Dual Band GNSS Antenna
|
| Route map mode |
Spectrum analyzer and OTA Analysis (LTE, DSS, NSA, and 5G)
Plot method: Time, position, GNSS; Map type: Outdoor (position information embedded, maps created with JDMapCreator), Indoor (no position information embedded)
|
| Online route map (RA-ORM) map type |
Open street map
Plot method: GNSS position
|
Real Time Spectrum Analysis (Option RA-RTSA-100)
| Frequency span |
110 MHz real time
Supports panoramic persistence view
|
|---|---|
| IF bandwidth | 110 MHz |
| Resolution bandwidth |
30 kHz to 10 MHz
Depends on span, 1-3-10 sequence
|
| A/D converter | 2929.12 Msps, 14 bits |
| FFT lengths | 8192 or 2024 |
| Maximum acquisition time | 1000 ms |
| Minimum IQ resolution | 8.138 ns |
| Probability of intercept (POI) |
Normal: 33.59 μs; High: 1.92 μs
Span: 110 MHz
|
| Spectrum display trace detectors |
Normal, positive peak, negative peak, sample, average (RMS)
6 traces; 6 markers
|
| Persistence spectrum processing rate | ≤ Max 15,000/s |
| DPX bitmap resolution | 201 x 801 |
| Persistence dwell time per step | 100 ms to 100 s |
| Persistence trace processing |
Color-graded bitmap, +Peak, -Peak, average
Trace length 801
|
| Persistence spectrogram time resolution per line |
100 ms to 1sec, user selectable
Trace detection: +Peak, -Peak, Average (RMS)
|
| Frequency range | 9 kHz to 9 GHz |
IQ Waveform Capture (Option RA-IQ-CAP)
| Mode | Realtime spectrum analyzer |
|---|---|
| Maximum bandwidth | 110 MHz |
| Maximum sample rate | 122.88 Msps |
| Total capture size | 3.89 GB |
| Capture time, 110 MHz bandwidth |
8.29 sec
IQ sample rate 122.88 Msps
|
| Capture time, 79 MHz bandwidth |
12.44 sec
IQ sample rate 81.92 Msps
|
| Capture time, 50 MHz bandwidth |
16.59 sec
IQ sample rate 61.44 Msps
|
| Capture time, 20 MHz bandwidth |
33.19 sec
IQ sample rate 30.72 Msps
|
| Capture time, 10 MHz bandwidth |
1 min 6 sec
IQ sample rate 15.36 Msps
|
| Capture time, 5 MHz bandwidth |
2 min 12 sec
IQ sample rate 7.68 Msps
|
| Capture time, 2.5 MHz bandwidth |
4 min 25 sec
IQ sample rate 3.84 Msps
|
| Capture time, 1.3 MHz bandwidth |
9 min 51 sec
IQ sample rate 1.92 Msps
|
Interference Analysis (Option RA-IA)
| Spectrum analyzer | Sound indicator, interference ID, spectrum recorder |
|---|---|
| Spectrogram | Collect up to 72 hours of data |
| RSSI | Collect up to 72 hours of data |
| Interference finder |
Power measurements on geographical maps based on GPS geo-coordinates and antenna azimuth
Requires Antenna Advisor JD70050007
|
| Radar chart |
Power measurements on radar chart based on antenna azimuth
Requires Antenna Advisor JD70050007
|
| Spectrum replayer | Plays back recorded spectrum with OneAdvisor 800 |
RFoCPRI Interference Analysis (Option RA-RFOCPRI-2TO8)
| Optical interface | Dual QSFP or SFP (supports all MSA compliant SFP modules) |
|---|---|
| Line rates | CPRI Rates 2 to 8 |
| Resolution bandwidth (RBW) |
Range: 10 kHz to 100 kHz, 7.5 kHz -3 dB bandwidth, Steps: 1-3-10
Accuracy ±10 % nominal
|
| Video bandwidth (VBW) |
Range: 10 kHz to 100 kHz, 7.5 kHz -3 dB bandwidth, Steps: 1-3-10
Accuracy ±10 % nominal
|
| CPRI IQ sample width | 4 to 20 bits |
| CPRI mapping method | 1 and 3 |
| CPRI bandwidth | 3.84 MHz x N, where N=1 to 8 |
| CPRI TX clock | Internal, External, Recovered |
| CPRI port type | Master, Slave |
| Link status |
LOS, LOF, SDI, RAI, Optic RX Level
Port 1 and Port 2
|
| Interference analyzer | Spectrum (Single, Dual, and Quad Chart), Spectrogram (Single and Dual Spectrogram Chart with 2D or 3D diagrams), Interference ID, Sound Indicator, PRB Table, Spectrum Replayer, IQ Activity Scan |
Gated Sweep and TDD Auto Gated Sweep
| Gated sweep (RA-GSS) gate method | Gated FFT |
|---|---|
| Gated sweep (RA-GSS) gated delay range | 0 to 100 ms |
| Gated sweep (RA-GSS) gated length | 1 us to 100 ms |
| Gated sweep (RA-GSS) trigger source | External, Internal and GNSS |
| TDD Auto Gated Sweep (RA-TAGS) mode | LTE-TDD and 5G NR |
| TDD Auto Gated Sweep (RA-TAGS) configuration | LTE: Auto detection of frame format; 5G NR: Slot format (Standalone mode: Auto detection External, Internal and GNSS; Non standalone mode: Manual detection) |
| TDD Auto Gated Sweep (RA-TAGS) gated length | 0 to 13 Symbols |
| TDD Auto Gated Sweep (RA-TAGS) measurements | Spectrum, Persistent Spectrum, RSSI, Spectrogram, Persistent spectrogram, Interference Finder, Radar chart, Spectrum Replayer |
Channel Scanner (Option RA-CS)
| Measurement range (10 MHz to 18.5 GHz) | -110 to +25 dBm |
|---|---|
| Measurements | Channel scanner: 1 to 20 channels; Frequency scanner: 1 to 20 frequencies; Customer scanner: 1 to 20 channels or frequencies; Route map |
| Frequency range | 10 MHz to 9 GHz |
Blind Scanner DSS/LTE/NR (Option RA-BS)
| Frequency range | LTE: 100 MHz to 6 GHz; NR: FR1 Band: 410 MHz to 7.125 GHz, FR2 Band: 24 GHz to 44 GHz |
|---|---|
| Minimum detectable level (SS-RSRP) | LTE: -125 dBm; NR: FR1 Band: -129 dBm, FR2 Band: -110 dBm |
| Input signal level | FR1 Band: Up to +25 dBm, FR2 Band: Up to +20 dBm |
| Supported bandwidth | Up to 100 MHz |
| Sub-carrier spacing (SCS) | LTE & DSS: 15 kHz; NR: FR1 Band: 15 kHz and 30 kHz, FR2 Band: 120 kHz and 240 kHz |
| CP type for LTE | Normal and Extended |
| Frame period for NR and DSS | 5, 10, 20, 40, 80, 160 ms |
EMF Analysis (Options RA-EMF-SA, RA-EMF-5GNR)
| Supported antennas | G700050381: 400 MHz to 6 GHz Isotropic Antenna (VIAVI); G700050366: 650 MHz – 4 GHz (VIAVI); G700050367: 650 MHz – 6 GHz (VIAVI); USLP9143: 300 MHz – 7 GHz (Schwarzbeck); USLP9143B: 200 MHz – 7 GHz (Schwarzbeck); USLP9142: 800 MHz – 5 GHz (Schwarzbeck) |
|---|---|
| Measurement time | 1 – 60 minutes |
| Dwell time | 1 – 60 seconds |
| Units | dBμV/m, dBmV/m, dBV/m, V/m, W/m², dBm/m², A/m, dBA/m, mW/cm², % |
| Frequency error | ±10 Hz + ref freq accuracy, 99% confidence level |
| Limits | ICNIRP 2020 Occupational/General Public, ARPANSA Occupational/General Public, BGV B11 Exposure area 1, 26. BlmSchV General Public, FCC 1997 Occupational/General Public, ICNIRP 1998 Occupational/General Public, IEEE C95.1 2005 Upper Tier/General Public, Italy CM 2003 Exposure/Attention, Safety Code 6 (2015, 2009, 99-EHD-237) |
| EMF for 5G NR frequency range |
FR1 Band: 410 MHz to 7.125 GHz, Antenna dependent; FR2 Band: 24 GHz to 44 GHz, Antenna dependent
Option RA-EMF-5GNR or RA-5GNR-OTA
|
| EMF for 5G NR input signal range | FR1 Band: -60 to +25 dBm; FR2 Band: -60 to +20 dBm |
| EMF for 5G NR supported bandwidth | 5 MHz, 10 MHz, 15 MHz, 20 MHz, 25 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz, and 100 MHz |
LTE/LTE-A FDD and TDD Analysis (Options RA-LTEFDD-SIA/OTA, RA-LTETDD-SIA/OTA)
| Frequency range | 9KHz to 9, 18.5, 32, 44 GHz based on radio analysis module |
|---|---|
| Minimum detectable level |
-125 dBm
S-SS RSRP
|
| Input signal range | -75 to +25 dBm |
| Channel power accuracy | ±1.0dB (typical) |
| Supported bandwidths | 1.4, 3, 5, 10, 15, and 20 MHz |
| Frequency error | ±0.05 ppm |
| Residual EVM |
2.0% (typical)
@ -20dBm
|
| RF analysis measurements | Channel Power, Occupied Bandwidth, Spurious Emissions, ACLR, Multi-ACLR, Spectrum Emission Mask |
| Signal analysis measurements (SIA) |
Constellation, Data Channel, Control Channel, Frame, Subframe, Power vs. Time (Frame), Carrier Aggregation (up to 5 component carriers), Data Allocation Map, Time Alignment Error, Power Statistics CCDF
TDD adds Power vs. Time (Slot)
|
| OTA analysis measurements (OTA) | OTA Channel Scanner, OTA ID Scanner, OTA Multipath Profile, OTA Route Map, OTA Control Channel, OTA Datagram, Freq/Time/Power Variation |
DSS Analysis (Options RA-DSS-SIA, RA-DSS-OTA)
| Frequency range | 9KHz to 9, 18.5, 32, 44 GHz based on radio analysis module |
|---|---|
| Minimum detectable level |
LTE: -125 dBm; NR: -110 dBm
S-SS RSRP
|
| Input signal range | -70 to +25 dBm |
| Supported bandwidths | 1.4, 3, 5, 10, 15, and 20 MHz |
| Frequency error | ±0.05 ppm |
| Residual EVM |
2.0% (typical)
@ -20dBm
|
5G NR Analysis (Options RA-5GNR-OTA, RA-5GNR-SIA, RA-5GNR-CPS, RA-5GNR-RAN
| Frequency range | 9KHz to 9, 18.5, 32, 44 GHz based on radio analysis module |
|---|---|
| Minimum detectable level |
FR1 Band: -120 dBm; FR2 Band: -110 dBm
S-SS RSRP
|
| Input signal range | FR1 Band: -75 to +25 dBm; FR2 Band: -70 to +20 dBm |
| Supported bandwidths | Up to 100 MHz |
| Frequency error | ±0.05 ppm |
| Residual EVM |
2.0% (typical)
@ -20dBm
|
| Channel power accuracy |
±1.0 dB typical
RA-5GNR-RAN, RA-5GNR-TM, RA-NSA-OTA
|
| OTA analysis measurements | Beam Analyzer, Carrier Scanner (up to 8), Route Map, Beam Availability Index, Freq/Time/Power Variation, Multipath Profile |
| Cell phase synchronization (RA-5GNR-CPS) measurements | Cell phase graph by PCI (up to 5), Cell phase table (PCI, S-SS RSRP, Sync Error, Time Error, S-SS SINR, S-SS RSRQ), Route Map cell phase heat map |
| 5G NR TM (RA-5GNR-TM) standard | 3GPP TS 38.141 series V15.2.0, V15.4.0, v1640, v16.5.0 |
| NSA OTA (RA-NSA-OTA) measurements |
NSA Analyzer (up to 8 LTE or NR carriers), NSA Scanner (up to 8 LTE or NR carriers), Route Map (up to 8 LTE or NR carriers)
Fast mode: Strongest PCI; Normal mode: Multi PCIs
|
Ethernet
| Test interfaces/bit rates | 10M/100M/1000M Electrical LAN (Option CA10M1GE); 10GigE LAN (Option CA10GELAN); 25GigE LAN (Option CA25GE); 40GigE LAN (Option CA40GE); 50GigE LAN (Option CA50GE); 100GigE LAN (Option CA100GE) |
|---|---|
| Interface type | 10M, 1, 10, 25 GigE LAN: SFP/SFP+/SFP28 Port 1 and Port 2; 40, 50, 100 GigE LAN: QSFP Port 1 and Port 2 |
| Traffic | Line Rate Traffic Tx and RX for all Interfaces; Single Stream Generation / Analysis; Multiple Streams Generation / Analysis |
| Layer 3 | Single Stream (IPv4 and IPv6), Multiple Streams (IPv4) |
| Dual simultaneous tests | Option: CADUALAPPS |
| Capture | Up to 10GigE (Option CA10GCAPTURE); up to 25GigE (Option CA25GCAPTURE); up to 40, 50, 100 GigE (Option CA100GCAPTURE) |
| Capture memory | 256MB per port |
| Modes of operation | Terminate, Loopback |
| Timing | Recovered from Rx, Internal (Stratum 3), Recovered from External |
| Ethernet and IP layer | Layer 2 (802.3 and DIX), Layer 3 (IPv4), VLAN (Single tag) |
| Workflows | RFC 2544, Y.1564, QuickCheck, Optics Self-Test, Cable Test, 5G NR Discovery |
| Measurements | Throughput, Frame Loss, Roundtrip Delay, Packet Jitter |
Interfaces
| RF In impedance |
50 Ω
Nominal
|
|---|---|
| RF In damage level |
+27 dBm, ±50 VDC
Average CW power
|
| Trigger In/Out, GNSS connector |
SMA, female
50 Ω nominal
|
| Reference In connector |
SMA, female
50 Ω nominal
|
| Reference In frequency | 10 MHz, 13 MHz, 15 MHz |
| Reference In input range | -5 to +5 dBm |
| SFP cage | SFP/QSFP, 2 ports |
| RF In connector type |
Type-N female
9 kHz to 9 GHz
|
Power
| Battery type |
14.4 V, 6800 mAh (Lithium ion)
Accepts two additional PEM (Power Expansion module)
|
|---|---|
| Battery operation time, standard |
> 1:30 hours
Typical; mode, frequency dependent; new battery with fully charged battery
|
| Battery operation time, optional (two PEMs) |
> 3:40 hours
Typical; mode, frequency dependent; new battery with fully charged battery
|
Environmental
| Operating temperature, AC power |
0 to 40°C (32 to 104°F)
Battery charging
|
|---|---|
| Operating temperature, battery | -10 to 55°C (14 to 131°F) |
| Storage temperature | -20 to 60°C (4 to 140°F) |
| Maximum humidity | 95% RH (noncondensing) |
| Altitude | 4,572 m (15,000 ft) |
| Vibration | Random MIL-PRF-28800F Class 2 |
| Shock | MIL-PRF-28800F |
| Bench handling | MIL-PRF-28800F |
| Transit drop | MIL-PRF-28800F Class 2 |
| EMC | IEC/EN 61326-1:2006 (complies with European EMC); ISPR11:2009 +A1:2010 |
| ESD | IIEC/EN 61000-4-2 |
Physical
| Dimensions (with one battery) |
279 X 170 X 117 mm (10.9 x 6.7 x 4.6 in)
Standard configuration with OneAdvisor 800
|
|---|---|
| Recommended calibration cycle | 1 year |
| Weight (with internal battery) |
< 4.52 kg (9.96 lb.)
Standard configuration with OneAdvisor 800
|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- RF spectrum assessment and interference analysis
- Automated interference detection with TDD Auto Gated Spectrum (TAGS) technology and Interference Advisor
- Signal recording of digital RF data (I/Q) with configurable real-time spectrum bandwidths up to 110MHz
- Fronthaul transport and synchronization (IEEE 1588) verification
- LTE/LTE-A, DSS and 5G NR over-the-air coverage analysis
- 5G NR cell phase synchronization verification
- EMF exposure measurement against ICNIRP, FCC, IEEE and national limits
- RFoCPRI interference analysis
- Ethernet service activation with RFC 2544 and Y.1564 workflows
Options & Accessories
| Option | Description |
|---|---|
| ONA-800A | OneAdvisor ONA 800A Mainframe with Display — Requires one radio analysis module |
| CAA06MA | 6 GHz Cable and Antenna Analyzer Module |
| CAA06MB | 6 GHz Cable and Antenna Analyzer Module with Bias Power |
| ONA-MF2-PEM | Power Expansion Module |
| C5TEM-R2 | Timing Module w/ Rubidium Oscillator and Multi-Frequency/Constellation Antenna |
| ONA-MF-BT | Bluetooth Connectivity |
| ONA-MF-WIFI | Wi-Fi Connectivity |
| SAA-ADVISOR | Smart Access Anywhere for Remote Control |
| ONA-CAA-2P | 2 Port Transmission Measurement — Requires: CAA06MA or CAA06MB |
| ONA-CAA-RFS | RF CW Source — Requires: CAA06MA or CAA06MB |
| RA-PAA | Post Analysis Application Connectivity for OneAdvisor Radio Analysis |
| RA-GNSS | GNSS Connectivity — Requires: JD71050351 or G700050391 |
| RA-ORM | Online Route Map |
| RA-RTSA-100 | Realtime Spectrum Analysis 100 MHz |
| RA-IQ-CAP | IQ Waveform Capture — Requires: RA-RTSA-100 |
| RA-IA | Interference Analysis |
| RA-RFOCPRI-2TO8 | RFoCPRI Line Rates 2 to 8 for Interference Analysis |
| RA-GSS | Gated Sweep Spectrum |
| RA-TAGS | TDD Auto Gated Spectrum |
| RA-EMF-SA | EMF Analysis |
| RA-EMF-5GNR | EMF Analysis for 5G NR — Requires: RA-EMF-SA |
| RA-BS | DSS/LTE/NR Blind Scanner |
| RA-CS | Channel Scanner |
| RA-5GNR-OTA | 5G NR OTA Analysis |
| RA-5GNR-SIA | 5G NR Signal Analysis |
| RA-5GNR-CPS | 5G NR Cell Phase Synchronization — Requires: RA-5GNR-OTA or RA-5GNR-RAN |
| RA-5GNR-RAN | 5G RAN Analysis |
| RA-5GNR-TM | 5G NR TM Signal Analysis for Releases 15 and 16 |
| RA-NSA-OTA | NSA OTA Analysis — Requires: RA-5GNR-OTA or RA-5GNR-RAN |
| RA-LTEFDD-OTA | LTE/LTE-A FDD OTA Analysis |
| RA-LTEFDD-SIA | LTE/LTE-A FDD Signal Analysis |
| RA-LTETDD-OTA | LTE/LTE-A TDD OTA Analysis |
| RA-LTETDD-SIA | LTE/LTE-A TDD Signal Analysis |
| RA-DSS-OTA | DSS OTA Analysis — Requires: RA-LTEFDD-OTA or RA-LTETDD-OTA |
| RA-DSS-SIA | DSS Signal Analysis — Requires: A-LTEFDD-SIA or RA-LTETDD-SIA |
| CA100GE | 100GE including KR4 and KP4 FEC Test Option |
| CA50GE | 50GE Test Option |
| CA40GE | 40 Gigabit Ethernet Test Option |
| CA25GE | 25GE Test Option |
| CA10GELAN | 10 Gigabit Ethernet LAN Test Option |
| CA10M1GE | Up to 1 Gigabit Ethernet Test Option |
| CA10GCAPTURE | 10GE and 1GE Capture Test Option |
| CA25GCAPTURE | 25GE Capture Test Option |
| CA50GCAPTURE | 50GE Capture Test Option |
| CA100GCAPTURE | 100GE and 40GE Capture Test Option |
| CADUALAPPS | OneAdvisor Transport Dual Application up to 200G Test Option |
| G700050340 | Mag Mount RF omni antenna Type-K (f), 24 GHz to 40 GHz |
| G700050342 | Mag mount RF omni antenna with LNA; Type-K(f), 24 GHz to 40 GHz |
| G700050345 | Mag Mount RF Omni Antenna 617-960/1700-6000 MHz 8 ft. LL-195 with N-plug |
| G700050349 | RF Omni Antenna 600 MHz to 6 GHz with SMA to N Adapter |
| G700050366 | RF Log Periodic antenna SMA(f), 700 to 4000 MHz, 1.85 dBd |
| G700050367 | RF Log Periodic antenna SMA(f), 700 to 6000 MHz, 2.85 dBd |
| G700050381 | Isotropic Antenna Type-N(m), 400 MHz to 6 GHz |
| G700050370 | RF directional horn antenna kit, K(f), 26.5 GHz to 40 GHz, 15 dBi |
| G700050371 | RF directional horn antenna kit, K(f), 22 GHz to 33 GHz, 20 dBi |
| G700050390 | SMA mount Single Band GNSS antenna |
| JD71050351 | Mag Mount Single Band GNSS Antenna |
| G700050391 | Mag Mount Dual Band GNSS Antenna |
| JD731B | Directional power sensor (peak and average power) 300 to 3800 MHz |
| JD732B | Terminating power sensor (Average Power) 20 to 3800 MHz |
| JD733A | Directional power sensor (peak and average power) 150 to 3500 MHz |
| JD734B | Terminating power sensor (peak power) 20 to 3800 MHz |
| JD736B | Terminating power sensor (average/peak power) 20 to 3800 MHz |
| JD70050007 | Antenna Advisor handle (requires directional antenna) |
| JD78050509 | Y- Calibration Kit Type-N(m), DC TO 6 GHz, 50 Ω |
| JD78050510 | Y- Calibration Kit DIN(m), DC to 6 GHz, 50 Ω |
| JD70050509 | EZ-CAL Kit Type-N(m), DC to 6 GHz, 50 Ω |
| G700050150 | 98 Wh Lithium-Ion Battery |
| G700050128 | OneAdvisor 800 120 Watts DC to DC Car Cigarette Lighter Charger Adapter |
| G700050127 | OneAdvisor 800 AC/DC Power Adapter 160 W, 19 V |
| G700050701 | OneAdvisor 800 with RA/SPA module hard carrying case with wheels |
| ONA-800A-SCCL | OneAdvisor 800 Large Soft Carrying Case for RA Module |
| ONA-800A-WCL | OneAdvisor 800 Large Wrap Case for RA Module |
| ONA-800A-BP | OneAdvisor 800 Backpack |
| ONA-800A-BC | OneAdvisor 800 Back Cover |
| ONA-800A-HS | Hand Strap for OneAdvisor 800 |
| ONA-800A-FC | Front Cover for OneAdvisor 800 |
