SmartPocket V2 OLP-39X TruePON Tester for G-PON and XGS-PON

Pocket TruePON tester with selective G-PON (1490 nm) and XGS-PON (1577 nm) power measurement and PON-ID analysis

Photo Diode: InGaAs
Resolution: 0.01 dB, 0.001 µW
Measurement Range for Power Level: -35…+10 dBm
Measurement Range for PON-ID (GPON): GPON: -30…0 dBm

Datasheet

Overview

The VIAVI SmartPocket V2 OLP-39X is a TruePON tester in the SmartPocket V2 family of pocket-sized fiber test instruments. It is intended for fiber technicians working in the last mile of FTTH deployments. It is a wavelength-selective Passive Optical Network (PON) power meter with TruePON data analysis of the downstream PON-ID.

TruePON analysis

TruePON lets the instrument read the OLT-ID carried in the downstream PON-ID data. This confirms that the technician is at the right drop terminal and that the drop fiber connects back to the correct OLT port. The instrument also detects the ODN class, which allows in-service insertion loss measurement. The PON-ID data it reads is standardized by ITU-T G.984.3 Amendment 3 for G-PON and by ITU-T G.987.3 Amendment 1 for XGS-PON. TruePON information is attached to stored measurement results. This gives an audit trail, or birth certificate, that records the power levels and OLT connectivity at the time of install.

ONT detection

An optional ONT detection function identifies the serial number, ONT type, ONT-ID and status of the ONT under test. This gives a 1:1 assignment of OLT port and ONT serial number.

Field use and data handling

The tester has one SC test port for measurement and IP44 protection against water and dirt. It runs on AA batteries or USB-C power, and its display uses softkeys. Results can be downloaded over USB-C to a PC. They can also be synced over Bluetooth Low Energy through the Mobile Tech App to StrataSync.

Key Features

Wavelength-selective PON power meter with PON-ID capabilities in a pocket-sized form factor
TruePON analysis and in-service insertion loss measurement
Reads PON-ID data to detect the OLT-ID
Detects ODN class for in-service insertion loss measurement
Extracts PON-ID data standardized by ITU-T G.984.3 Amendment 3 and ITU-T G.987.3 Amendment 1
ONT detection identifies ONT serial number, ONT type, ONT-ID and ONT status
Single test port connection for measurement
Storage for over 1000 test results
PC download via USB-C and Bluetooth Low Energy sync via Mobile Tech App to StrataSync
TruePON information attached to stored results as an audit trail of power levels and OLT connectivity
IP44 rating with water and dirt protection in a rugged pocket form factor
Long battery life and multiple powering options
Clear display and simple user interface with softkeys
Simultaneous selective power measurement and TruePON PON-ID data analysis of G-PON (1490 nm) and XGS-PON (1577 nm)
Detects the OLT-ID for both G-PON and XGS-PON
Supports co-existence of G-PON and XGS-PON for migration to 10G services
Simultaneous power level measurements for G/E-PON and XGS-PON/10G-EPON services

Specifications

Optical Measurement

Photo Diode	InGaAs
Resolution	0.01 dB, 0.001 µW
Measurement Range for Power Level	-35…+10 dBm
Measurement Range for PON-ID (GPON)	GPON: -30…0 dBm
Max. Power Level (before damage)	+ 15 dBm
Measurement Uncertainty (1490 nm)	1490 nm: ±0.5 dB / ±12 % under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75 % relative humidity, SM test fiber (Single Mode, 9µm core, 8° APC), when used with SC/APC connectors
Number of Calibrated Wavelengths	2 (1490, 1577 nm)
Optical Connectors	1x SC/APC
Spectral Range	Passband (1480…1500 nm, 1575…1580 nm)
Wavelength Setting	1490 nm, 1577 nm
Measurement Range for PON-ID (XGS-PON)	XGS-PON: -25…0 dBm
Measurement Uncertainty (1577 nm)	1577 nm: ±0.5 dB / ±12 % under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75 % relative humidity, SM test fiber (Single Mode, 9µm core, 8° APC), when used with SC/APC connectors

Storage and Interface

Data Storage	1,000 Results General (typical at 25°C)
Data Download Capability	USB-C for PC/Laptop Transfer or BLE to StrataSync via MTA

Power Supply

Batteries	2x Mignon (AA) Size
AC Operation	Via USB-C and Universal Power Adapter (Pmax.: 2.5 W)
Operating Time (PON Mode)	45 hrs. OLP-39G/-39X in PON Mode; continuous operation with dry batteries
Operating Time (TruePON or ONT Detection Mode)	15 hrs. OLP-39G/-39X in TruePON or ONT Detection Mode; continuous operation with dry batteries

Safety and Environmental Conditions

EMI/ESD	CE Compliant
Electromagnetic Compatibility	EN 61326-1:2013
Device Safety	EN 61010-1:2010/A1:2019
Recommended Calibration Interval	3 Years
Operating Temperature	-10 to +55 °C (14 to 131 °F)
Storage Temperature	-20 to +70 °C (-4 to +158 °F)
Max. Altitude	2,000 m (6,500 ft)
Pollution Degree	2
Ingress Protection	IP44
Humidity	15 to 85 % (Relative) up to +31 °C; 20 g/m3 (Absolute) > +31 °C occasional condensation is tolerable as a limit condition

Physical

Dimensions (H x W x D)	30 x 80 x 150 mm (1.2 x 3.1 x 5.9 in)
Weight (w/o Batteries)	200 g (0.45 lb)

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

Optical power level measurement for PON services
Detecting OLT-ID information
Detecting ONT serial number, ONT-ID, type and status
Multi-service PON deployment and installs
Network build and maintenance for FTTH
Confirming drop terminal and drop fiber connectivity to the correct OLT port
Verifying end-to-end PON optical loss before installation
Measuring optical power levels for G/E-PON and XGS-PON/10G-EPON services
Migration to XGS-PON for 10G service deployment

Included

Instrument
Switchable adapter
Belt bag
Neck strap
Quick start guide
Safety instructions
Alkaline batteries
USB cable

Options & Accessories

Option	Description
2336/94.02G	ONT detection SW option for OLP-39G/X via SmartReporter
2336/94.02S	ONT detection SW option for OLP-39G/X via StrataSync and Mobile Tech App (MTA) — Requires StrataSync account
2302/90.04	Calibration Report TruePON Testers (OLP-39G and OLP-39X)
2302/90.05	Battery Extension (w/o Power Bank) for OLP-39G/-39X
2229/90.21	OCK-10 Cleaning Kit complete
22122619	USB 2.0 Type A to Type C Cable
2229/90.01	2x Alkaline Batteries Mignon AA-Size LR6
2302/90.01	Universal AC Power Adapter
OLP-39X-ONT-KIT	OLP-39X ONT Detection Kit — Includes TruePON Tester content, ONT Detection SW option (already installed), Battery Extension (w/o Power Bank), Coupler