T-Ray 5000 ASR5001 Spectroscopy Rail for Terahertz Transmission Spectroscopy
A 60 cm rail with tip-tilt mounts and sample holder for terahertz transmission spectroscopy with the T-Ray 5000 system.
- Rail Length
- 60 cm
- Size (W x H x D)
- 60 x 15.5 x 7.5 cm
- Weight
- 2.0 kg
Overview
The ASR5001 Spectroscopy Rail is an accessory for the Luna T-Ray 5000 terahertz measurement system, which is suited to spectroscopic investigations. The T-Ray 5000 provides spectral resolution down to 1.5 GHz at 100 Hz through its long high-speed delay, and the system is robust enough for industrial deployment while remaining flexible for experimental work.
The transmitter (HTS40nm) and receiver (HRS40n1) mount on the ASR5001 rail to perform transmission spectroscopy measurements. A standard mount holds accessories or standard sample cards, and the rail accommodates lenses up to 150 mm working distance. An iris on the sample holder blocks portions of the beam that do not pass through the sample.
Tip-tilt stages allow optimization of the beam alignment to obtain maximum bandwidth. When used with an HTS40nm transmitter and an HRS40n1 receiver, the assembled collinear transceiver provides over 3.5 THz of bandwidth and 70 dB of signal-to-noise ratio.
Key Features
- Easy alignment without an optical table
- Sample mounting fixture with integrated iris
- No tool required to change lenses
- Accommodates various focal length lenses
- Used to measure transmission spectroscopy
- Compatible with HTS40nm and HRS40n1
Specifications
| Rail Length | 60 cm |
|---|---|
| Size (W x H x D) | 60 x 15.5 x 7.5 cm |
| Weight | 2.0 kg |
| Maximum lens working distance | 150mm |
|---|---|
| Bandwidth |
over 3.5 THz
Assembled collinear transceiver when used with an HTS40nm and an HRS40n1
|
| S/N |
70dB
Assembled collinear transceiver when used with an HTS40nm and an HRS40n1
|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Non-destructive test (NDT) with terahertz
- Time domain spectroscopy
- Defect detection
- Basis weight measurement
- System optimization and verification
- Reaction kinetics monitoring
- Medical and biological research
Included
- 60 cm rail
- 2 tip-tilt head mounts on sliders
- Sample holder on slider
Documents & Resources
Related Products
Fiber-coupled terahertz receiver for the T-Ray 5000 with bandwidth over 3.5 THz and a signal-to-noise ratio above 70 dB.
Fiber-coupled terahertz transmitter for the T-Ray 5000 with enhanced low-frequency power for high material penetration imaging.
Fiber-coupled terahertz transmitter for the T-Ray 5000 that balances output power with spectral bandwidth over 3.5 THz.
Fiber-coupled terahertz transmitter for the T-Ray 5000 with uniform signal to noise over a broad bandwidth for spectroscopy and layer thickness measurement.
Terahertz control unit that drives THz transmitters, receivers or T-Gauge sensor heads and processes measured data at up to 1 kHz.
Dual channel terahertz control unit that controls two terahertz sensors for multi-sensor applications, with processing at up to 1 kHz.