OneExpert HFC ONXF-720-PON-42-204-TSX DOCSIS 3.1 and PON Field Tester with PON Selective Power Meter, 42/204 MHz, TSX Package
OneExpert HFC ONX-720 package with a PON selective power meter, VFL, a 42/204 MHz DOCSIS 3.1 module and 10 Gbps Ethernet and WiFi 7 testing.
- Fiber optic testing
- PON Selective Power Meter
- DOCSIS module
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- Software package
- ONX 720 TSX Package
- TruePON PON-ID Analysis with OLT-ID and Loss
- Opt.
Overview
The VIAVI OneExpert HFC ONXF-720-PON-42-204-TSX is a new-unit package in the OneExpert HFC (ONX-720/730) family. It pairs the ONX-720 mainframe and its TSX software package with a PON Selective Optical Power Meter, a Visual Fault Locator, and the ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz upstream, 1.0/1.2 GHz downstream).
The ONX-720/730 platform tests DOCSIS, Ethernet, PON and WiFi 7 throughput at up to 10 Gbps. Test Process Automation (TPA) and the OneCheck workflows run guided, one-button pass/fail tests for Ethernet, WiFi, PON and DOCSIS, and save geo-tagged results.
Optical testing
The PON selective power meter measures coexistent PON wavelengths separately through a dedicated SC/APC port. It can read the PON-ID to confirm the connection to the expected OLT. The optional TruePON software checks total optical loss, PON-ID, OLT connectivity and received power against the ODN class. A 1 mW VFL is built in, and USB fiber scopes with automatic pass/fail analysis are supported.
DOCSIS and RF
The ONX-720/730 continues the RF and DOCSIS test functions of the ONX-620/630 and works with the existing ONX RF modules. It covers downstream and upstream analysis, OFDM signal metrics and ingress scanning, and it supports forward and reverse sweep with the SCU-1800.
Platform
The unit is IP54 rated, drop-tested and modular, with a path to 25G/50G PON and DOCSIS 4.0. It has integrated GPS, StrataSync support, a mobile app connection over Bluetooth, and a field-replaceable 96 W/hr battery.
Key Features
- PON Selective Optical Power Meter with SC/APC connection
- Visual Fault Locator (1 mW)
- ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz)
- ONX-720 TSX software package
- OneCheck Ethernet and OneCheck WiFi included
- VIAVI SpeedCheck to 5 Gbps and 10 Gbps included
- Broadband power capability for the selective PON hardware
- Unified OneCheck workflow automates pass/fail for DOCSIS, Ethernet, WiFi and PON
- PON-ID reading to validate connection to the expected OLT
- Optional TruePON verification of total optical loss, PON-ID, OLT connectivity and received power
- Optional OneCheck PON with GPON/XGS-PON emulation using VIAVI SFP
- WiFi 7 2x2 testing in the 2.4, 5 and 6 GHz bands
- 10GBase-T RJ-45 Ethernet testing from 100M to 10G
- USB fiber scope support with Auto Analysis
- IP54 rated, drop-tested, modular design
- Upgradeable for 25G/50G PON and DOCSIS 4.0
- Integrated GPS, StrataSync and VIAVI Mobile Tech app support
- Field-replaceable 96 W/hr Li-Ion battery for multi-day use
Specifications
| Fiber optic testing | PON Selective Power Meter |
|---|---|
| DOCSIS module |
ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
42/204 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1 Packages
|
| Software package | ONX 720 TSX Package |
| TruePON PON-ID Analysis with OLT-ID and Loss | Opt. |
| Visual Fault Locator (1 mW) | Standard |
| OneCheck WiFi7 / OneCheck Ethernet | Standard |
| VIAVI SpeedCheck – 5 Gbps / 10 Gbps | Standard |
| Ookla Speedtest, VIAVI TrueSpeed, iPerf (5 Gbps / 10 Gbps) | Opt. |
| Optical Ethernet Testing over SFP+ | Opt. |
| OneCheck PON w/Emulation – GPON/XGS PON using VIAVI SFP | Opt. |
| HomeTDR, Home Leakage Test, Return Signal Generator w/Loopback, Ingress Expert | Opt. |
| Reverse Sweepless Sweep, QAM Video MPEG Verification, Field View w/RSG | N/A |
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test Results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G
SFP dependent; optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| WiFi Test Results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
| TCP Throughput Test | VIAVI SpeedCheck: 5 Gbps, 10 Gbps; Ookla Speedtest: 5 Gbps, 10 Gbps; VIAVI TrueSpeed (RFC-6349): 5 Gbps, 10 Gbps |
| Performance | Up to 10 Gbps for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf client: 5 Gbps, 10 Gbps |
| Throughput Test Results | Delay, Upstream and Downstream Bit Rates |
| Communication Interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart Device Support |
VIAVI Mobile Tech app, Android 8 or newer, iOS 12 or newer
Recommendation
|
| USB Optical Fiber Scope | P5000i, FiberChek Probe |
|---|---|
| Results for Zone Defects / Scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle Size Detection | <1 μm |
| Power Source | USB port |
| Photo Diode | InGaAs |
|---|---|
| Spectral Range | Passband (1260…1500 nm, 1540…1650 nm) |
| Wavelength Setting |
1342, 1358, 1490, 1577 nm; Dual: 1490/1577, 1342/1577, 1358/1577 nm; Broadband: 1270...1650 nm, Custom step size 1 nm
Broadband in Broadband Mode (activated SW option required)
|
| Resolution | 0.01 dB, 0.001 µW |
| Measurement Range for Power Level | -45…+3 dBm |
| Max. Power Level | +15 dBm |
| Measurement Uncertainty |
1490 nm: ±0.5 dB/±12 %; 1577 nm: ±0.5 dB/±12 %; 1342 nm: ±0.5 dB/±12 %; 1358 nm: ±0.5 dB/±12 %; Broadband: ±0.5 d/±5 %
Under reference conditions: -2 dBm (CW), nominal wavelength, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber, SC/APC connectors; Broadband value printed as '±0.5 d/±5 %'
|
| Measurement Range for PON-ID | GPON: -30...0 dBm; XGS-PON: -25...0 dBm |
| Number of Calibrated Wavelengths | 2 (1490, 1577 nm) |
| Tone Detection |
270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; in Broadband Mode (activated SW option required)
|
| Connection | SC/APC |
| Fiber Compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output Modes | Continuous and flashing |
| Connector Interface | Universal 2.5 mm (fixed) |
| Output Power | 1 mW |
| Laser Safety Rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
| Frequency Range | 0.5 to 1,218 MHz |
|---|---|
| Frequency Accuracy | ±10 ppm typical @25°C |
| Downstream Max Input Power (Port 1) | 60 dBmV total integrated power |
| Operation on Powered TAP | Operate with up to 90 VAC/DC on input port |
| Upstream Ingress Spectrum Scan (Port 2) | 0.5–204 MHz, calibrated range 4-204 MHz |
| Upstream Dynamic Range | 50 dB |
| Downstream Calibrated Power Levels | -20 dBmV to +50 dBmV |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| OFDM Channels | 24-192 MHz wide − up to 3 active OFDM channels |
| Minimum Lock Level | −15 dBmV |
| Diplexer (42/204 MHz module) |
42 MHz: upstream 4-42 MHz; downstream 54–1,004 MHz; 204 MHz: upstream 4-204 MHz: downstream 258-1,218 MHz
Diplexer return path options may not be available on all units
|
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
| Forward / Reverse Sweep Compatibility | SCU-1800 (forward); SCU-1800 or DAA/RPHY via XperTRAK (reverse) |
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
With RF Module, without protective case
|
| Operating Temperature Range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity Range | 10% to 90% RH, non-condensing |
| For Indoor/Outdoor Use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop Rating | 1 m (3.3 ft) onto concrete |
| Operating Altitude | 4000 m max |
| DC Input Power | 12 V@5 A |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery Charge Time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery Life |
3-5 day typical usage for installation technicians
10 installs a day
|
| USB Host Port(s) | USB-C, USB-A (USB 3.0) |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Multi-gig residential service activation
- Small business service installation testing
- DOCSIS 3.1 service turn-up and troubleshooting
- GPON and XGS-PON service validation
- Ethernet throughput testing up to 10 Gbps
- WiFi 7 service delivery verification
- Upstream ingress troubleshooting
- Fiber connector inspection and fault location
Included
- PON Selective Optical Power Meter
- VFL
- OneCheck Ethernet
- OneCheck WiFi
- 10G SpeedCheck
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- ONX 720 TSX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-TRUEPON | TruePON software option — Requires PON selective HW |
| ONXF-SW-PON-BROADBAND | Enable Selective Power Meter to operate in broadband mode |
| ONXF-SW-OPTICAL-LOSS | Optical Loss test mode option — Save reference and calculate loss |
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing — Over VIAVI supported SFPs |
| ONXF-SW-OC-PON | OneCheck PON — PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation — Live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | XGS-PON Emulation — Datasheet describes it as 'GPON Emulation for live service testing on GPON network' |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps — Also available as 1, 3 and 5 Yr timed licenses deployed via StrataSync (-1Y, -3Y, -5Y) |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps — Also available as 1, 3 and 5 Yr timed licenses deployed via StrataSync (-1Y, -3Y, -5Y) |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-RSG-LOOP | Return Signal Generator with Loopback Option |
| ONX-CATV-SW-INGRESS-EXP | Ingress Expert Option for ONX 720's |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP+ 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP+ 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP+ 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |