VIAVI ONE LabPro ONE-1600ER OSFP 1600Gb/s test module
VIAVI / High-Speed Ethernet Testing
ONE-1600ER

VIAVI ONE LabPro ONE-1600ER OSFP 1600Gb/s Test Module

OSFP test module for validating 1.6Tb/s pluggable transceivers and systems on 224G electrical lanes, from the physical layer up to Ethernet traffic.

Port configuration
2 x OSFP 1600G in 1.5U and 4 x OSFP in 2U
Heat sink options
OSFP Integrated Heat Sink (IHS) or Riding Heat Sink (RHS) or a combo module with 2 x OSFP IHS and 2 x OSFP RHS
Electrical lane rate
224G
Connectivity
Optical transceiver modules or electrical connectivity using HCB (Host Compliant Board) or DAC/ACC/AEC/AOC

Overview

The VIAVI ONE LabPro ONE-1600ER is a test module for 1.6Tb/s pluggable transceivers and systems that use 224G electrical lanes. It is intended for optical transceiver manufacturers, IC designers and systems manufacturers working on high-speed 1.6Tb/s Ethernet projects. It covers Physical Layer, FEC, MAC/IP and Ethernet network performance testing.

The ONE-1600ER validates performance and supports debugging in R&D, system verification and production. It shows the behaviour of the lower layers, including PHY, PCS and FEC stability, along with Ethernet performance.

The module can generate alarms and errors and can stress FEC logic and power integrity. It also cools coherent modules such as ZR/ZR+ efficiently. With the ONE Controller C1, a system scales up to 16 ONE-1600 test modules and up to 128 x 800GE ports, with dynamic licensing.

Key Features

  • 2 x OSFP 1600G in 1.5U and 4 x OSFP in 2U module configurations
  • Available with OSFP Integrated Heat Sink (IHS), Riding Heat Sink (RHS), or a combo module with 2 x OSFP IHS and 2 x OSFP RHS
  • ONE Controller C1 in 1U scales up to 16 x ONE LabPro ONE-1600 Test Modules
  • 8 x 200GE, 4 x 400GE, 2 x 800GE and 1.6TE framed Ethernet
  • Supports optical transceiver modules or electrical connectivity using HCB (Host Compliant Board) or DAC/ACC/AEC/AOC
  • Traffic generation and analysis including thousands of traceable flows
  • FEC compliance validation, including at 1.6TE
  • Bit slip analysis to identify timing and phase sensitivities
  • CMIS 5.3 with support for up to 240 application codes, especially applicable to ZR/ZR+ modules
  • Generation of alarms and errors and stress testing of FEC logic and power integrity
  • Fully integrated test system with dynamic licensing
  • Scalable up to 128 x 800GE ports with ONE Controller C1

Specifications

Ports and Form Factor
Port configuration 2 x OSFP 1600G in 1.5U and 4 x OSFP in 2U
Heat sink options OSFP Integrated Heat Sink (IHS) or Riding Heat Sink (RHS) or a combo module with 2 x OSFP IHS and 2 x OSFP RHS
Electrical lane rate 224G
Connectivity Optical transceiver modules or electrical connectivity using HCB (Host Compliant Board) or DAC/ACC/AEC/AOC
Ethernet Testing
Framed Ethernet rates 8 x 200GE, 4 x 400GE, 2 x 800GE, 1.6TE
Traffic generation and analysis Thousands of traceable flows
FEC compliance validation Including at 1.6TE
CMIS CMIS 5.3 with support up to 240 application codes
Especially applicable to ZR/ZR+ modules
Scalability
Controller ONE Controller C1 in 1U
Maximum modules per controller 16 x ONE LabPro ONE-1600 Test Modules
Maximum port scale 128 x 800GE ports
With ONE Controller C1

Applications

  • IC development and validation test
  • 1600G transceiver testing and validation
  • System Verification Testing (SVT)
  • Manufacturing testing
  • Ethernet system testing

Documents & Resources

ONE LabPro Overview
brochure · PDF